User Manual

ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 16
2. The running time of the xture will now be displayed. Press
MENU to exit.
VER - Use this function to display the Software version of
the unit.
1. Press the either the MENU button until “VER” is displayed,
press ENTER.
2. The display will show the software version.
RSET - Use this function to reset the unit.
1. Press the MENU button until “RSET” is displayed, press
ENTER.
2. The xture will now reset.
BALA - With this function you can adjust the RGB colors
to make your desired color.
1. Press the MENU button until “BALA” is displayed, press
ENTER.
2. Use the UP or DOWN buttons to nd the color you wish to
adjust.
3. Once you nd the color you want to adjust press ENTER, the
displayed value will begin to ash. Use the UP or DOWN but-
tons to adjust the value. Once you have made your adjustment
press ENTER.
4. Repeat steps 2-3 until satised.
Inno Pocket Z4 System Menu
ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 15
again. Press ENTER when you have made your desired setup.
TEST - This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press
ENTER.
2. The xture will now run a self test.
MANU - In this submenu you are able to test the different
functions; pan, tilt, LEDs, zoom, dimmer, and strobe.
1. Press the MENU button until “MANU” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEMP - With this function you can check the temperature
of the xture.
1. Press the MENU button until “TEMP” is displayed, press
ENTER.
2. The xture temperature will now be displayed. Press MENU
to exit.
FHRS - With this function you can display the running
time of the unit.
1. Press the MENU button until “FHRS” is displayed, press
ENTER.
Inno Pocket Z4 System Menu