Instruction manual

©American DJ Supply® - www.americandj.com - Flash Panel 16 Instruction Manual Page 10©American DJ Supply® - www.americandj.com - Flash Panel 16 Instruction Manual Page 9
2. The Flash Panel 16 uses 48 DMX channels to operate, see the
next page for the DMX traits.
3. To run your fixture in DMX mode, set your desired DMX address
using the dipswitches. You must also have dipswitch 10 in the ON
position.
4. Plug in the fixture via the XLR connections to any standard DMX
controller. following the set-up specifications that come with
your DMX controller.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the
unit. Use standard XLR microphone cables to link your units to-
gether. Remember that the Male XLR connector is the input and
the Female XLR connector is the output. The first unit in the
chain (master) will use the female XLR connector only. The last
unit in the chain will use the male XLR connector only.
2. You will also have to link the power cords to each other, as you
did with the XLR cables.
3. Using the Master unit, choose your desired mode or program and
connect the “Slave” unit or units. For the slave units put
dipswitches 1 and 10 in the ON position.
Flash Panel 16 Operating Instructions
Channel Value Function
1 RED 1
1 - 255 0% - 100%
2 GREEN 1
1 - 255 0% - 100%
3 BLUE 1
1 - 255 0% - 100%
4 RED 2
1 - 255 0% - 100%
5 GREEN 2
1 - 255 0% - 100%
6 BLUE 2
1 - 255 0% - 100%
43 RED 15
1 - 255 0% - 100%
44 GREEN 15
1 - 255 0% - 100%
45 BLUE 15
1 - 255 0% - 100%
46 RED 16
1 - 255 0% - 100%
47 GREEN 16
1 - 255 0% - 100%
48 BLUE 16
1 - 255 0% - 100%
Flash Panel 16 DMX Values & Functions