User manual

ADJ Products, LLC - www.adj.com - MEGA TRI38 SYSTEM User Manual Page 8
MEGA TRI38 SYSTEM Operating Instructions
MEGA TRI38 SYSTEM Operating Instructions
ADJ Products, LLC - www.adj.com - MEGA TRI38 SYSTEM User Manual Page 7
LED Display On/Off: To make the display stay ON all of the time
press the MODE and UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.
Operating Modes:
The MEGA TRI38 SYSTEM has six operating modes:
• RGB Dimmer Mode - Choose one of the three colors to remain stat-
ic or adjust the intensity of each color to make your desired color.
• Built-In Program - There are 12 built-in programs to choose from.
• Static Color Mode - There are 32 colors to choose from.
• Auto Mode - This will run a automatic program.
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the ADJ Show Designer™.
RGB Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When “r.XXX” is displayed you are in Red dimming mode. Press the
UP and DOWN buttons to adjust intensity.
3. When “G.XXX” is displayed you are in Green dimming mode. Press
the UP and DOWN buttons to adjust intensity.
4. When “b.XXX” is displayed you are in Blue dimming mode. Press the
UP and DOWN buttons to adjust intensity.
5. After you have adjusted the RGB colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
6. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.99” (fastest flash).
Built-In Program Mode:
1. Plug the fixture in and press the MODE button until “Pr.XX” is dis-
played. “XX” represents a number from 1-12. Use the UP or DOWN
buttons to scroll through the 12 programs. Once you have found
your desired program press the SET UP button.
2. Pressing the SET UP button will display “SP.XX”. When this is dis-
played you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between “SP.01”
(slowest) and “SP.99” (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Flash
(Strobe) mode.
3. After pressing SET UP, “FS.XX” will be displayed, this is Flash mode.
The Flash can be adjusted between “FS.00” (flash off) to “FS.99”
(fastest flash).
Static Color Mode:
In this mode the MEGA TRI38 SYSTEM you can select one of 32 custom
colors to remain static.
1. Plug the fixture in and press the MODE button until “Pr.XX” is dis-
played. “XX” represents the program number that is displayed.
2. Use the UP or DOWN buttons to scroll to Program 1 (Pr.01).
3. Press the SET UP button, “CL.XX” will be displayed, this is Static
Color mode. Use the UP or DOWN button to find your desired color.
Auto Run Mode:
1. Plug the fixture in and press the MODE button until “AUTO”, is dis-
played.
2. Press the SET UP button so that “SP.XX” is displayed. When this is
displayed you can adjust the running speed of your desired program.
Use the UP or DOWN button to adjust the speed between “SP.01”
(slowest) and “SP.99” (fastest). Once you have set your desired run-
ning speed, you can press the SET UP button to to enter the Flash
(Strobe) mode.
3. After pressing SET UP, “FS.XX” will be displayed, this is Flash mode.
The Flash can be adjusted between “FS.00” (flash off) to “FS.99”
(fastest flash).
Sound Active Mode:
In this mode the MEGA TRI38 SYSTEM will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until “SU.XX” is dis-
played. “XX” represents the sound sensitivity setting (0-31) currently
displayed. Use the UP or DOWN buttons to adjust the
sensitivity. “SU.01” is the least sensitive, “SU.31” is the most.
2. The fixture will now change via sound.
DMX Mode:
Operating through a DMX controller gives the user the freedom to cre-
ate their own programs tailored to their own individual needs. This func-