User Manual

Setting the Center Position
The center position of an effect should be set using the limitations, however sometimes it’s
fun to move an effect around the room live. To do this, tap the center button to the bottom
left of the moves area. Drag the point around the grid to adjust the center point of the
effect. Tapping the reset button on the right puts the center point back in the center of the
grid. The button on the left enables the giro which allows you to control the center point by
moving the iPad (not available on Android, sorry!).
Flash FX
The 5 flash effects are in the center of the console and are only active when pressed. This
allows you to create quick bursts of effects. If you want to latch the effects on, this can be
done by touching a flash effect, dragging outside the button and releasing. The following
effects are available from left to right:
● Smoke - activates a smoke machine.
● Blackout - switches off all lights.
● WOW! - creates a build-up of strobing effects synchronized with the BPM.
● Blinder - directs a powerful bright light to the front.
● Freeze - pauses the show, freezing the current levels being output.