User Manual

Special FX
The special effects allow control of Iris, Zoom, Gobo and Prism (if your fixtures support this
functionality). Tap the dial to enable the effect or select a gobo, then drag around the dial to
control the selected effect- e.g. gobo rotation speed, Iris level etc… By default these dials
are rotary, but if you would prefer to control these in a linear fashion by moving up and
down, this can be set in the Mydmx GO settings which is accessible from the iPad settings
on iPad, or the menu on Android.
Strobe
Tapping the strobe button will flash the lights at different speeds depending on the value of
the slider.
Dimmer
The slider on the right controls the brightness of all lights. You can control the brightness of
each fixture type, and flash the lights by tapping the Subs button.
Presets
The presets allow you to store a snapshot of your current show. There are 50 presets in
total with 10 visible at a time. Swipe left/right to jump to the previous/next bank. To store a
preset, touch and hold it for 1 second, like with a car stereo! Choose a name for your preset
and tap ‘Save Preset’. Any manual channel values set on the fixtures screen will also be
saved.
Sync
Each effect has been designed to sync with the music, either with a BPM (beats per minute)
to create a consistent beat-matched effect, or via the music pulse where the effects pause
when the music stops.