User Manual

● Tap the square button next to Moves or Colors to sync the respective effects with
the BPM, a metronome icon will appear.
● Tap a second time to sync with the pulse, a microphone icon will appear.
● Tap again to stop the sync, a clock icon will appear.
When in BPM sync mode, the speed control of the effects will change from a slider to a
selector allowing you to choose the beat division. For example, if you have the disco effect
selected, the 1x will change the color on each beat, the 2x will change the color every 2
beats, and the 1/2x will change the color twice for each beat.
Pulse
Music pulse sync works like the built-in effects which often come with your lights. It uses the
microphone of the tablet to listen to the music. When the volume level jumps over a
threshold, the effect will jump to the next section. The threshold is calculated automatically
depending on the volume level.
BPM - TAP
Be sure the Color or Move effects are in BPM mode with the metronome icon visible, then
tap the BPM with the TAP button at least 3 times.