User Manual

Setup
To get going with mydmx GO, connect your DMX interface by USB (Android only)
or by WiFi (iPad and Android). Tap the menu on the left and select your interface
from the list. Go to the Fixtures screen, select your Brand and Device from the
bottom and tap Add a Fixture. This is all you need to do to get started. From here
you can proceed to the Live page of this manual, or continue reading from here
for a more in-depth explanation.
Connecting to a DMX Interface
mydmx GO has been designed to be used with the mydmx GO WiFi DMX interface. Simply
connect to this DMX interface over WiFi (default password is smartdmx0000), once
connected via wifi, start the mydmx GO App. The device may take up to 20 seconds to
connect. No further purchases are required. If you wish to change your password, download
the HardwareManager software from the mydmx GO webpage, connect your mydmx GO
interface via USB to your computer, select your device on the left by clicking on it once, wait
a second… once all the info is read, in the next section over to the right of your interface,
you will be able to scroll to the bottom where the Wifi options are. Change your password in
the Password section then click Store to save your new password to your interface.