User Manual

Setting a color
To set which colors will be used in the effects, tap the color wheel at the bottom right. The
color wheel is used to set the colors for the effects, and the segments around the color
wheel are used to override the effect and recall static colors on all fixtures with fixed color
wheels. Tap in an empty space in the color wheel to add a color. Drag a color point outside
the color wheel to remove it. Up to 6 colors can be selected in the color wheel + 6 static
colors with the segments. These are displayed below the color wheel.
Static colors are always fixed and are spread across lights with fixed color wheels. You can
change the pattern by tapping the button to the left of the color wheel button. This pattern
button is also used with color mixing fixtures in the STOP effect.
Moves
Move effects are available to the left of the console. I would really recommend setting the
limitations first, especially if you have Moving Head fixtures. It’s really easy to do and only
takes a minute. Further information on this here. Move effects are applied to any fixture
which has Pan and Tilt channels.
Choosing an Effect
As with the color effects, the move effects are triggered by tapping the 8 segment buttons.
Each move effect can be adjusted using the 4 options in the center - Fan, Speed, Size and
Shift.