691 Control Code Distributor INSTALLATION INSTRUCTIONS The AD1691 and the ADS1691FX Control Code Distributors provide a maximum of 64 buffered Control Code outputs to AD receivers from a single Control Code Source input. Each output will drive up to 5000 feet (1524m) on 18AWG, shielded, twisted pair cable. One Control Code Distributor processes information for a maximum of 64 receivers. All versions of the 1691 are compatible with all American Dynamics Matrix Switching Systems and Control Codes sources.
The software/firmware furnished with this equipment is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMATIC. The software/firmware is furnished to the purchaser under a license for use on a single system. Information furnished by SENSORMATIC is believed to be accurate and reliable.
AMERICAN DYNAMICS The installation of this product should be made by qualified service personnel and should conform to all local codes. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ABOUT THIS MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1691 ii
1691 DESCRIPTION CODE LED Rear View Front View Figure 1 - 1691 Control Code Distributor DESCRIPTION MAINTENANCE The AD1691 and the ADS1691FX Control Code Distributors provide a maximum of 64 buffered Control Code outputs to AD receivers from a single Control Code Source input. Each output will drive up to 5000 feet (1524m) using 18AWG, shielded, twisted pair cable. The 1691 Control Code Distributor contains no userserviceable parts.
INSTALLATION 1691 Installation Mounting Surfaces This installation should be made by qualified service personnel and should conform to all local codes. Safeguards must be taken to avoid unintentional operation by employees, janitors, and cleaners working about the premises, by falling objects, by customers, by building vibration, and by similar causes. Mount all versions of the 1691 with 1/4-inch diameter bolts appropriate to the type of mounting surface.
1691 INSTALLATION Connections Code Source Connections Model AD1691 Power Connections - WARNING Do not connect the AD1691 to the primary power source until ALL connections and switch settings have been completed and verified. The AD1691 is supplied with a wall transformer (AD part number TP8002) which can be connected to an outlet for primary power. Connect one of the 12 Volt AC leads from the TP8002 Transformer to one of the designated AC terminals on the AD1691 (see Figure 3).
CONNECTIONS 1691 Model ADS1691FX Power Connections Code Source Connections - WARNING Do not connect the ADS1691FX to the primary power source until ALL connections and switch settings have been completed and verified. The ADS1691FX has three terminals for receiving control code from a suitable Control Code Source such as the AD1202 P/T Controller. The terminals are designated B for black, W for white, and S for shield.
1691 CONNECTIONS Code Output Connections - All Models Daisy Chain Connection The 1691 Code Distribution Unit provides 64 code line outputs from a single code line input. Each code line can accommodate a maximum of three codecontrolled units in a “Daisy Chain” configuration of less than 500 feet.
CONNECTIONS 1691 Table 1 - 1691 Control Code Distributor Connection Table Code Outlet Terminal Wire Size Code Destination (Receiver) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 6 Wire Color Wire Length
1691 CONNECTIONS Table 2 - 1691 Control Code Distributor Connection Table Code Outlet Terminal Wire Size Code Destination (Receiver) 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 7 Wire Color Wire Length
1691 TYPICAL SYSTEM CONNECTIONS 1691 FROM AD1202 P/T CONTROLLER Other Receivers Receiver Terminate per Instructions in Receiver Manual Other Receivers Receiver Terminate per Instructions in Receiver Manual B Black Code Wire S B W S B W W White Code Wire 1691 Control Code Distributor S Shield Wire S W B S W B B W 120Ω 1/4Watt Termination Resistor (Not Supplied) TERM 1 2 3 4 75 Ω DATA 24 24 22 20 18 16 14 12 10 8 6 4 2 23 21 19 17 15 13 11 7 5 3 1 EXTERNAL 2 MON 1 2 3
TYPICAL SYSTEM CONNECTIONS AD1691 FROM AD2350 SWITCHER 1691 RECEIVER CODE LED WB S B W S Maximum Distance between AD2350 and AD1691 is 5000 ft, using shielded, 18 AWG cable 120VAC, 60Hz Input S W B AC AC TP8002 * 12Volts AC Output * = 120 Ohm Termination Required (see Pages 4 and 5) ALARMS RELAY CODE CAMERAS 1 23 45 6 78 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 SI NONCC BWS BWS BWS BWS MONITORS 31 120V 60Hz 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 1 2
91 TYPICAL SYSTEM CONNECTIONS ADS1691FX FROM AD2350 SWITCHER RECEIVER CODE LED WB S B W S Maximum Distance between Receiver and ADS1691FX is 5000 Ft, using shielded, 18 AWG cable ADS1691FX Control Code Distributor Sensormatic Model# 0300-0914-02 Transformer 230V, 50/60Hz Input S W B AC AC * 1 * = 120 Ohm Termination Required (see Pages 4 and 5).
TYPICAL SYSTEM CONNECTIONS AD1691 CONTROL CODE DISTRIBUTOR TO AD1241 PAN/TILT 1691 Power and Lens Control to Camera* *Refer to the camera installation manual for pin designations.
1691 TYPICAL SYSTEM CONNECTIONS ADS1691FX CONTROL CODE DISTRIBUTOR TO AD1241 PAN/TILT Power and Lens Control to Camera* *Refer to the camera installation manual for pin designations.
TYPICAL SYSTEM CONNECTIONS AD1691 CONTROL CODE DISTRIBUTOR TO AD1242 PAN/TILT 1691 Power and Lens Control to Camera* *Refer to the camera installation manual for pin designations.
1691 TYPICAL SYSTEM CONNECTIONS ADS1691FX CONTROL CODE DISTRIBUTOR TO AD1242 PAN/TILT Power and Lens Control to Camera* *Refer to the camera installation manual for pin designations.
TYPICAL SYSTEM CONNECTIONS AD1691 CONTROL CODE DISTRIBUTOR TO AD1270 SERIES DOME AD1270 Series Pan/Tilt Backbox 1691 3/4" Weather-proof Fitting 3/4" Weather-proof Conduit Coaxial Video Cable 120VAC, 50/60Hz Input AC AC W B S MAXIMUM DISTANCE between AD1270 Series and AD1691 is 5000 Ft, using shielded, 18 AWG cable 24Volts AC Output WBS CODE LED J6 AD1691 Control Code Distributor * = 120 Ohm Termination Required (see Pages 4 and 5) TP8002 Transformer W CONTROL CODE SOURCE B S 120VAC, 60Hz In
1691 TYPICAL SYSTEM CONNECTIONS ADS1691FX CONTROL CODE DISTRIBUTOR TO AD1270 SERIES DOME AD1270 Series Pan/Tilt Backbox 3/4" Weather-proof Fitting 3/4" Weather-proof Conduit Coaxial Video Cable 230VAC, 50/60Hz Input AC AC W B S MAXIMUM DISTANCE between AD1270 Series and ADS1691FX is 5000 Ft, using shielded, 18 AWG cable 24Volts AC Output WBS CODE LED 230V, 50/60Hz Input Sensormatic Model# 0300-0914-02 Transformer J6 ADS1691FX Control Code Distributor * = 120 Ohm Termination Required (see Pag
Declaration of Conformity Manufacturer: Sensormatic CCTV Systems Division Manufacturer’s Address: Sensormatic CCTV Systems Division 1 Blue Hill Plaza Pearl River, New York, 10965 USA Sensormatic CCTV Systems Division 600 Bradley Hill Road Blauvelt, NY 10913 USA Sensormatic Electronics Corporation State Rd. 110 Km 5.8 Poblado San Antonio Aguadilla P.R.
SPECIFICATIONS: Electrical Ratings: AD1691 ADS1691FX 12 VAC, 60 Hz, 5 W 12 VAC, 50/60 Hz, 100 mA, EU Compliant Mounting: Surface Mount, Indoor Weight: 10 lbs. aprox. (4.
