Operating instructions

Setting the Day of the Week
The day of the week must be set prior to programming the
Event Timers, page 4-9. When a code is entered, the three-
digit day code indicated below is displayed for three seconds in
the Status Line of the on-screen display.
To set the day of the week:
1. Turn the keyswitch to PROG position (AD2078A) or enter
the PROG mode (ADTT).
2. Enter one of the following F2 code combinations:
“61 F2” Sunday (SUN)
“62 F2” Monday (MON)
“63 F2” Tuesday (TUE)
“64 F2” Wednesday (WED)
“65 F2” Thursday (THR)
“66 F2” Friday (FRI)
“67 F2” Saturday (SAT)
“60 F2” Displays the current day of the week, for three
seconds, in the Status Line.
3. Turn the keyswitch to the OFF position (AD2078A) or exit
the program mode (ADTT).
Setting Date Format
There are three options for the DATE format in the on-screen
display. The default format is: MM/DD/YY.
T
o set the date format:
1. Turn the keyswitch to PROG position (AD2078A) or enter
the PROG mode (ADTT).
2. Enter one of the following F2 code combinations:
“21 F2” MM/DD/YY
“22 F2” DD/MM/YY
“23 F2” YY/MM/DD
“24 F2” Toggles through the three date formats.
3. Turn the keyswitch to the OFF position (AD2078A) or exit
the program mode (ADTT).
3-3
NON-MENU PROGRAMMING