Operating instructions

Cursor Positioning and Menu Paging
The following instructions regarding the operation of the
cursor apply to all menus.
To position the cursor to a desired location on the menu:
• On the AD2078A keyboard, use the arrow direction keys
(in the FOCUS and ZOOM sections of the keyboard) to
move the cursor to the desired selection.
• On the ADTT
To change pages in a multi-page menu:
Using AD1678CM Keyboards:
• To move vertically through the pages (rows), press the OFF
or ARM on the AD1678CM in the CAMERA section of the
keyboard.
• To change directly to a page for a specific row/entry:
1. Enter the desired row/entry number on the keypad.
2. Press either the OFF or ARM on the 1678C).
• To move horizontally through the pages (columns), press
the OFF or ARM button in the MONITOR section of the
keyboard.
• To change directly to a page for a specific column/heading:
1. Enter the desired column/heading number on the
keypad.
2. Press either the MONITOR OFF or ARM button.
Using AD2078A Keyboards:
• To move vertically through the pages (rows), press the
PAGE up/down buttons in the IRIS section of the keyboard.
• To change directly to a page for a specific row/entry:
1. Enter the desired row/entry number on the keypad.
2. Press either (IRIS) PAGE up/down button.
• To move horizontally through the pages (columns), press
the OFF or ARM button in the MONITOR section of the
keyboard.
• To change directly to a page for a specific column/heading:
1. Enter the desired column/heading number on the
keypad.
2. Press either the MONITOR OFF or ARM button.
Using ADTT Keyboards:
• When the ADTT is in the DISPLAY mode, the following
dual function buttons are used for navigating through the
Main Menu selections:
Page Down, Page Up, Exit, Enter, Cursor Left, Cursor Right,
Cursor Up, and Cursor Down.
SYSTEM
The System menu provide the means to define the system
Time and Date, System Tours, System Salvos, Event Timers,
and Alarm Contacts. The Monitor Status line of this menu
brings up a status screen for reviewing the current status of all
system monitors.
To select an entry from the System menu:
1. Move the cursor to the desired line.
or
Enter the number (1 - 6) for the desired line.
2. Press the ACK button to access that selection.
Each selection of the System menu brings up another menu.
Refer to the following pages for the specific menu procedures.
SET TIME AND DATE page 4-4
SET SYSTEM TOURS page 4-5
SET SYSTEM SALVOS page 4-7
SET EVENT TIMERS page 4-9
SET ALARM CONTACTS page 4-10
MONITOR STATUS page 4-12
The PREVIOUS MENU line of each of these menus returns to
the System menu for further selections.
The RETURN MAIN line of the System menu returns to the
Main Selection menu, page 4-2.
MENU PROGRAMMING
4-3
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 MONITOR STATUS
RETURN MAIN