Operating instructions

SET SYSTEM SALVOS
A System Salvo is a group of cameras, with associated preset
and auxiliary actions, that can be called simultaneously to a
contiguous group of monitors. A salvo can be called manually
via a keyboard command, automatically when in a System
Tour, or on alarm when included in an Alarm Contact setup.
The SET SYSTEM SALVOS menu permits programming of
eight salvos. When this is called from the System Menu
(above), the following menu is displayed.
POS (Position) - Refers to the order of cameras displayed on
the contiguous monitors.
CAM (Camera) - A camera number is associated with each
salvo position. If the CN field is “S”, the CAM entry is
associated with another System Salvo, and the Camera number
is a System Salvo number (nested Salvo).
PRE (Preset) - If the camera is equipped with motorized
pan/tilt and lens with feedback potentiometers, preset scenes
may be defined. If presets have been defined, the preset scene
specified in this entry is called automatically when the camera
associated with that entry is displayed on the monitor. If a
preset is not desired, enter a zero in this field.
AUX (Auxiliary) - If the camera site is equipped with a
Receiver that has Auxiliary relays, an auxiliary can be
activated automatically when the salvo is called. See the
appropriate setup information in the associated Receiver
manual. If no auxiliary action is desired, enter a zero in this
field.
CN (Connect Next) - Connect Next selects the next camera in
the table for simultaneous callup to the next contiguous
monitor, thereby forming the salvo. A selection of Yes (“Y”),
No (“N”), or Salvo (“S”) can be chosen for Connect Next.
• If “Y” is selected, the next camera in the table is included in
this salvo.
• If “N” is selected, the salvo stops at this camera entry.
• If “S” is selected, another System Salvo is called and this
salvo stops at this entry.
NOTE: On the first Salvo entry line, if an actual camera
number matches the salvo number, only “Y” or “N” can
be selected for Connect Next. On the last Salvo entry
line only “N” or “S” can be selected for Connect Next.
PREVIOUS MENU - Returns to the SYSTEM menu.
To call a System Salvo from a keyboard:
1. Select (Call) the first monitor for the first camera in the
salvo group. Each successive camera in the salvo is
displayed on contiguous monitors from the one selected.
2. Enter the desired Salvo number (1-8).
3. Press the Salvo key. The cameras, presets, and auxiliaries
associated with that salvo will be displayed on the selected
monitor, up to the nth contiguous monitor.
MENU PROGRAMMING - SYSTEM MENU
4-7
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 MONITOR STATUS
RETURN MAIN
SET SYSTEM SALVOS
SALVO - 01
POS CAM PRE AUX CN
1 0001 00 0 - Y
2 0002 02 2 ON Y
3 0003 03 3 ON Y
4 0004 04 4 ON Y
5 0005 70 3 ON Y
PREVIOUS MENU