Operating instructions

SET EVENT TIMERS
An Event Timer permits automatic callup of System Tours to
any monitor(s), based on the time of day and the day of week.
Each of these automatic callups is an event. A maximum of 35
events are available for programming. When selected from the
System Menu, the EVENT TIMER menu is displayed.
To create a new Event Timer, enter the new time value in the
first line under EVENT TIMER menu title.
1. Place the cursor at the time location (e.g., 07:07).
2. Enter the new time through the keyboard, and press the
ACK button. (Time is always entered in military time.)
3. Enter timer settings via the EDIT TIMER function, below.
EDIT TIMER - This function is used to program the entries
for System Tour callups to the monitors. Place the cursor on
the EDIT TIMER line and press the ACK button to display the
SET EVENT TIMERS menu.
Each entry in this menu identifies a System Tour that is called
at the specified Event time for the indicated monitor (MON) on
the indicated day of the week.
T
o program or change a System Tour callup in this menu:
1. Move cursor to the desired day of week and monitor.
2. Enter the desired System Tour number (00 is a “no-action”
command while 25 is a hold monitor at current camera).
3. Press the ACK button.
When finished making changes in the Set Event Timers menu,
move the cursor to the PREVIOUS MENU line and press the
ACK button to return the EVENT TIMER menu.
The remaining EVENT TIMER menu functions operate on
event timers previously created, as follows:
NEXT TIMER - Moves to the next event timer.
1. Place cursor on the NEXT TIMER line.
2. Press the ACK button to select the next event timer.
CLEAR TIMER - Deletes the selected event timer.
1. Place cursor on the CLEAR TIMER line.
2. Press the ACK button - the time resets to 24:00.
ENABLE (DISABLE) TIMER - Activates (or disables) the
selected timer. The EVENT TIMER menu line displays the
selection that is opposite the current timer state.
1. Place cursor on the ENABLE (DISABLE) TIMER line.
2. Press the ACK button to switch between selections. This
action either ENABLEs or DISABLEs the timer.
CHANGE TIMER TO HH:MM - Changes the time for the
current Event Timer:
1. Place cursor on the CHANGE TIMER line
2. Enter the correct hour via the keyboard.
3. Press the ACK button - the correct hour is displayed.
4. Enter the correct minutes via the keyboard.
5. Press the ACK button - the correct minute is displayed.
MENU PROGRAMMING - SYSTEM MENU
4-9
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 MONITOR STATUS
RETURN MAIN
EVENT TIMER
07:11 DISABLED
EDIT TIMER
NEXT TIMER
CLEAR TIMER
ENABLE TIMER
CHANGE TIMER TO HH:MM
PREVIOUS MENU
SET EVENT TIMERS
TIME - 07:11
DAY OF WEEK
MONSMTWTFS
001 01 02 03 04 05 06 07
002 00 00 00 00 00 00 00
003 00 00 00 00 00 00 00
004 00 00 00 00 00 00 00
005 00 00 00 00 00 00 00
PREVIOUS MENU