Operating instructions

MONITOR STATUS
Selecting the MONITOR STATUS entry from the System
menu provides a status display to the operator.
Information regarding each monitor (MON) pertains to the:
• CAM - Camera number currently displayed on the
monitor
• STS - Monitor status display codes indicate either:
H = Hold
R = Run
A = Alarm
S = Salvo
• TOUR - Tour currently running on the monitor
Example: The following is an example of a Monitor Status
display, with a Video Loss Detector module enabled.
MONITOR STATUS
MON CAM STS TOUR
001 0024 R 02
002 0001 H 03
003 0032 A 04
004 0001 R 05
005 0001 S - -
ACK TO EXIT
The above example shows that:
- Monitor 1 is displaying camera 24, and is in a run status in
tour 02.
- Monitor 2 is displaying camera 01, and is in a hold status in
tour 03.
- Monitor 3 is displaying camera 32, and is in a alarm status
in tour 04.
- Monitor 4 is displaying camera 01, and is in a run status in
tour 05.
- Monitor 5 is displaying camera 01, and is displaying a
Salvo.
Press the ACK button at any time to exit the Monitor Status
display and return to the System Menu.
MENU PROGRAMMING - SYSTEM MENU
4-12
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 MONITOR STATUS
RETURN MAIN
MONITOR STATUS
MON CAM STS TOUR
001 0024 R 02
002 0001 H --
003 0032 A --
004 0001 R 05
005 0001 S --
ACK TO EXIT