Operating instructions

MENU PROGRAMMING - MONITOR MENU
MONITOR
The Monitor menu configures each monitor. Enter the desired
monitor number via the keyboard and press the ACK button.
Press the NEXT button to advance to each of the menu lines.
ARM TYPE - (See Monitor Arming Codes table)
Press the ACK button to cycle through the types.
ACK - Manual Alarm Acknowledge Enable (YES/NO):
YES = manual acknowledge enabled
NO = manual acknowledge disabled
Press the ACK button to toggle between YES and NO.
TOUR - indicates which tour is set for the selected monitor.
Enter the System Tour number and press the ACK button.
TIME DATE - indicates if the time/date display is ON or OFF
for the monitor.
Press the ACK button to toggle between ON or OFF.
TITLE DISPLAY - indicates if the title display is ON or OFF
for the monitor.
Press the ACK button to toggle between ON or OFF.
CAM TITLE LCK - freezes the on-screen Camera Title
LOCKED - “freezes” the title placed on the monitor
UNLOCKED - title is updated with each camera switch
Press the ACK button to toggle between these codes.
MON TITLE LCK - freezes the on-screen Camera Number
LOCKED - camera number and monitor status for that
monitor is placed into a locked state
UNLOCKED - camera number and monitor status for that
monitor is updated with each event
CAMERA ID - camera identification is updated with each
camera switch and monitor status for that monitor is
placed into a locked state
Press the ACK button to sequence through the three codes.
BRIGHTNESS - indicates intensity of the monitor display:
1 = black, 8 = brightest
Press the ACK button to cycle through the levels.
DISPLAY STATUS - indicates current status of the monitor:
HOLD or RUN.
Press the ACK button to toggle between HOLD or RUN.
Monitor Arming Codes
(See Appendix pages A-3 to A-5 for code definitions.)
Code Description Arm Type
1 Single/Sequence/Instant Clear SSI
2 Single/Sequence/Auto (after 20 seconds) SSA
3 Single/Sequence/Manual (ACK key) SSM A*
4 Single/Hold/Instant Clear SHI
5 Single/Hold/Auto Clear SHA
6 Single/Hold/Manual Clear SHM A*
First Monitor Second Mon
Arm Type Arm Type
13 Dual/Hold and Sequence/
Instant Clear DHI DSI
14 Dual/Hold and Sequence/
Auto Clear DHA DSA
15 Dual/Hold and Sequence/
Manual Clear DHM A* DSM A*
16 Disarm monitor DIS
* Manual Clear/Acknowledge method set at factory
The Manual Clear/Acknowledge feature can be enabled or
disabled for any Instant and Auto Clear arming code. This
must be done after a monitor is armed with one of these codes.
See the ACK line of the menu:
• ACK Enabled (YES) - When enabled, the letter “A” is
displayed after the arming code (e.g., SSI A).
• ACK Disabled (NO) - When disabled, the letter “A” does
not appear after the arming code.
4-13
MONITOR - 2
ARM TYPE - DIS ACK - N
TOUR - --
TIME DATE - ON
TITLE DISPLAY - ON
CAM TITLE LCK - UNLOCKED
MON TITLE LCK - UNLOCKED
BRIGHTNESS - 8
DISPLAY STATUS - HOLD
RETURN MAIN