Operating instructions

KEYBOARD/CAMERA CONTROL
This Access control function prevents selected keyboards from
controlling remote functions on selected cameras. (Any
camera that is locked from a keyboard would also be default
locked from that keyboard for control.)
The KEYBOARD/CAMERA CTRL menu is used to configure
each of the 16 keyboards for the 32 cameras. This menu
display contains eight cameras per page. See page 4-3 for
menu paging instructions.
The menu entry codes are:
Y = keyboard has access to camera control
N = keyboard does not have access to camera control
The above example indicates that all the keyboards have
access to the cameras. See the keyboard numbering column
codes on the Keyboard/Monitor menu, page 4-17.
The Keyboard/Camera Control menu entries are set default to
Y, all keyboards have access privilege to control all cameras.
To change the control access on selected cameras for selected
keyboards:
1. Position the cursor to the camera and keyboard location
that is to be changed.
2. Press the ACK button. When the ACK button is pressed
the current setting toggles between Y = control, N = no
control at the cursor location.
3. Repeat steps 1 and 2 for any additional changes desired.
4. Position the cursor at the PREVIOUS MENU line.
5. Press the ACK key to return to the main ACCESS Menu.
Port Expander Notes: If a port expander is used, configure
column "a", "b", "c", and "d" to access (Y) or to lock out
(N) that particular keyboard from one of the five monitors.
If a port expander is not used, configure column "a" only.
MENU PROGRAMMING - ACCESS MENU
KEYBOARD/CAMERA CTRL
1111 2222 3333 BBBB
CAM abcd abcd abcd 2345
01 YYYY YYYY YYYY YYYY
02 YYYY YYYY YYYY YYYY
03 YYYY YYYY YYYY YYYY
04 YYYY YYYY YYYY YYYY
05 YYYY YYYY YYYY YYYY
06 YYYY YYYY YYYY YYYY
07 YYYY YYYY YYYY YYYY
08 YYYY YYYY YYYY YYYY
PREVIOUS MENU
4-19
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CTRL
4. MONITOR/CAMERA ACCESS
5. ARM CONTACTS
RETURN MAIN