Operating instructions

MONITOR/CAMERA ACCESS
This Access function defines the Monitor to Camera access
which prevents selected monitors from viewing selected
cameras.
The MONITOR/CAMERA ACCESS menu is used to
configure each of the five monitors to the 32 cameras. This
menu display contains eight cameras per page. See page 4-3
for menu paging instructions.
The menu entry codes are:
Y = monitor has access to camera
N = monitor does not have access to camera
The above example menu indicates that all the monitors have
access to the cameras.
The Monitor/Camera Access menu entries are set default to Y,
all monitors have access privilege to view all cameras.
To change the access for viewing a selected camera on any
monitor:
1. Position the cursor to the camera and monitor that is to be
changed.
2. Press the ACK button. When the ACK button is pressed
the current setting toggles between Y =view, N = no
viewing at the cursor location.
3. Repeat steps 1 and 2 for any additional changes desired.
4. Position the cursor at the PREVIOUS MENU line.
5. Press the ACK key to return to the main ACCESS Menu.
MENU PROGRAMMING - ACCESS MENU
MONITOR/CAMERA ACCESS
MONITOR
CAM12345
01 YYYYY
02 YYYYY
03 YYYYY
04 YYYYY
05 YYYYY
06 YYYYY
07 YYYYY
08 YYYYY
PREVIOUS MENU
4-20
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CTRL
4. MONITOR/CAMERA ACCESS
5. ARM CONTACTS
RETURN MAIN