Operating instructions

PRIORITY MENU
The PRIORITY menu is used to configure each of the eight
priority levels, to set priority levels for keyboards or users, and
to set user passcodes. The PRIORITY menu displayed is
dependent on the current enabled status of USER IDS (see
System Options, page 4-16):
If USER IDS is ENABLED, the #1 item under the Priority
Menu heading indicates “SET USER”.
If USER IDS is DISABLED, the #1 item under the Priority
Menu heading indicates “SET KEYBOARD”.
The RETURN MAIN line of the Priority menu returns to the
Main Selection menu, page 4-3.
SET KEYBOARD
If USER IDS is disabled (page 4-16), the SET KEYBOARD
menu is used to set a priority level for each of the 40
keyboards. Each priority level is defined through the Set
Priority menu, page 4-32.
Select the keyboard to be setup:
1. Place the cursor at the KEYBOARD line.
2. Enter the desired keyboard number (1 - 40).
3. Press the ENTER key to accept the keyboard number
and move the cursor to the next line, PRIORITY
LEVEL.
To set a keyboard priority:
1. Enter a number from 1 (lowest priority) to 8 (highest
priority). A keyboard of higher priority can capture
control of cameras from keyboards with lower priorities.
2. Press the ENTER key to lock in the priority level and
move to the PREVIOUS MENU line.
Note: All keyboards default to level “8” priority.
PREVIOUS MENU - Returns to the PRIORITY menu.
SET USER
If USER IDs is enabled, the SET USER menu is used to set a
priority level and passcode for each of 64 users. Each priority
level is defined through the Set Priority menu, page 4-32.
Define the User to be selected:
1. Place the cursor at the USER line.
2. Enter the user number (1-64) to be defined.
3. Press the ENTER key to accept the user number and
move to the next menu line, PRIORITY LEVEL.
To set a user priority:
1. Enter a priority number from 1 (lowest priority) to 8
(highest priority). A user of higher priority can capture
control of cameras from users with lower priority levels.
2. Press the ENTER key to accept the priority level and
move to the next menu line, PASSCODE.
To set a passcode:
1. Enter a maximum of six digits by the keypad.
2. Press the ENTER key. The system then prompts to
verify the passcode by displaying “VERIFY
PASSCODE”.
3. Re-enter the same code digits by the keypad.
4. Press the ENTER key.
5. If the verification code is not the same as the original
code, the following error message is displayed:
**ERROR - REENTER PASSCODE**.
Repeat steps 1 through 4.
6. If the verification code does verify, the cursor
automatically moves to the PREVIOUS MENU line
item.
PREVIOUS MENU - Returns to the PRIORITY menu.
4-31
AD1024 MENU PROGRAMMING
PRIORITY
1. SET USER
2. SET PRIORITY
RETURN MAIN
PRIORITY
1. SET KEYBOARD
2. SET PRIORITY
RETURN MAIN
SET KEYBOARD
KEYBOARD - 01
PRIORITY LEVEL: 8
PREVIOUS MENU
SET USER
USER # - 01
PRIORITY LEVEL: 8
PASSCODE
PREVIOUS MENU