Operating instructions

AUXILIARY KEY CODE FUNCTIONS
F1 - Special function key:
F1 - Releases keyboard control of video trunk
1-F1 - Unlocks the current camera
2-F1 - Locks the current camera
99-F1 - Logoff from passcode Logon
F2 - Special function key:
1-F2 - Sets on-screen Time and Date display ON
2-F2 - Sets on-screen Time and Date display OFF
3-F2 - Sets Camera Title, Number, & Status display ON
4-F2 - Sets Camera Title, Number, & Status display OFF
5-F2 - Displays titles & date/time at the top of the screen
6-F2 - Displays titles & date/time at the bottom of the screen
7-F2 - Sets on-screen Time, Date, & Title display ON
8-F2 - Sets on-screen Time, Date, & Title display OFF
21-F2 - Sets date format to month-day-year (MM-DD-YY)
22-F2 - Sets date format to day-month-year (DD-MM-YY)
23-F2 - Sets date format to year-month-day (YY-MM-DD)
24-F2 - Steps through date formats
41-F2 - Sets date format to month-day-year (MM-DD-YY)
42-F2 - Sets date format to day-month-year (DD-MM-YY)
43-F2 - Sets date format to year-month-day (YY-MM-DD)
44-F2 - Steps through date formats
45-F2 - Disables bell at keyboard for all RS-232 ports
46-F2 - Enables bell at keyboard for all RS-232 ports
47-F2 - Disables bell signal sent to one keyboard
48-F2 - Enables bell signal sent to one keyboard
55-F2 - When you enter this key combination it is implied
that you will also enter another 2-digit F2 code
combination within three seconds:
99-F2 - System Reset
60-F2 - Displays current day of week
61-F2 - Sets day of week to Sunday
62-F2 - Sets day of week to Monday
63-F2 - Sets day of week to Tuesday
64-F2 - Sets day of week to Wednesday
65-F2 - Sets day of week to Thursday
66-F2 - Sets day of week to Friday
67-F2 - Sets day of week to Saturday
70-F2 - Displays software version number as last digit of the
code: “UF - - -” of the monitor status display
100-F2 - Sets video loss mode to OFF for called camera
101-F2 - Sets video loss mode to SYNC ONLY for camera
102-F2 - Sets video loss mode to VIDEO LOW for camera
103-F2 - Sets video loss mode to VIDEO MED for camera
104-F2 - Sets video loss mode to VIDEO HIGH for camera
105-F2 - Sets video loss mode automatically for called camera
106-F2 - Sets video loss mode automatically for all cameras
107-F2 - Updates video loss mode settings of all cameras from
AD1024 to the Video Loss Detection module
108-F2 - Clears the video loss mode for all cameras
109-F2 - Downloads video loss mode of called camera from
VLD module to AD1024
110-F2 - Downloads video loss mode of all cameras from VLD
module to AD1024
111-F2 - Prints current VLD mode setting of called camera
112-F2 - Prints current VLD mode setting of all cameras
301-F2 - SSI Monitor Arming
302-F2 - SSA Monitor Arming
303-F2 - SSM Monitor Arming
304-F2 - SHI Monitor Arming
305-F2 - SHA Monitor Arming
306-F2 - SHM Monitor Arming
307-F2 - BSI Monitor Arming
308-F2 - BSA Monitor Arming
309-F2 - BSM Monitor Arming
310-F2 - BHI Monitor Arming
311-F2 - BHA Monitor Arming
312-F2 - BHM Monitor Arming
313-F2 - DHI/DSI Monitor Arming
314-F2 - DHA/DSA Monitor Arming
315-F2 - DHM/DSM Monitor Arming
316-F2 - Disarm Monitor
317-F2 - Enable Manual Override
318-F2 - Disable Manual Override
A-11
AD1024 APPENDIX