Specifications

6
MegaPower LT
Mounting the Unit
All models of the MegaPower LT unit are equipped with mounting holes and are supplied
with screws and brackets for the optional fitting to a suitable rack or wall. Should the unit
be mounted, particular attention should be paid to ensure that the specification of the
equipment is not compromised. In particular, airflow, access, power isolation, weight and
any possible contamination should be considered, as should the potential for any abuse
that may lead to an operational malfunction or safety violation.
When choosing a suitable location for the unit, ensure:
• An electrical output socket with overload and short circuit protection is located within
a suitable distance for the included MP-PSU power supply.
• The power supply cord cannot become pinched or trapped under a heavy object.
The power cord should be routed so that it is not likely to be walked on.
When fixing the MegaPower LT into a either a 19” rack or onto a wall:
1. Fix the mounting brackets with the screws supplied. See the diagrams shown below
for guidance.
2. Screw the bracket mounted MegaPower LT into a either a 19” rack or onto a wall.
• Screws used to fix the MegaPower LT into either a 19” rack or onto a wall must be of
a suitable size and strength.
• When fixing the MegaPower LT onto a wall, the wall must be durable enough to take
the weight of the unit.