Specifications

13
Matrix Installation and Operation
Pin Validation
Enter Pin _ _ _ _
Entering the Menu System
To enter the menu system, follow the steps below:
1. Select a monitor by entering the monitor number and pressing the MONITOR (
)
key.
2. In multi-matrix networks it is also necessary to select a unit. To do this, enter the
address of the unit, then hold down the SHIFT (
) key and press the SITE SELECT
(
) key.
3. Press the SHIFT ( ) key and the MENU ( ) key together.
4. A screen will be displayed prompting for a password.
5. Enter the pin number using the numerical keys.
The factory default pin numbers for the:
• Supervisor menu is 0, 0, 0, 0.
• Administrator menu is 1, 7, 7, 6.
PIN INVALID is displayed if an incorrect pin number is entered.
Once the pin number has been correctly entered, the Administrator menu or Supervisor
menu is displayed.
NOTES
• It is strongly advised that you change the default passwords as soon as possible in
order to maintain system security. See page 18.
• If a password is lost, a recovery system is available. See Password Recovery on
page 46.
• Only RS-485 Mode will provide different User Levels, i.e.: Admin, Supervisor, etc.
RS-232 Keyboards (ADCC300 & ADCC1100 enter MPLT Menus w/o Password.
(Keyboard Password required for security).
RS-232 Keyboard (ADCC200) does not allow MPLT Menu Entry.