Specifications

37
Matrix Installation and Operation
Vertical Phase Synchronisation
The Installer menu has an synchronisation option which, if enabled, will cause the
MegaPower LT to transmit a vertical phase signal to all video inputs. This signal can be
used by compatible cameras to synchronise.
To enable this option, use the down joystick command to move to the VPSynch option
and use the right joystick command to set the parameter to Enabled.
Saving and Restoring Defaults
The feature can only be used if all Cameras connected to the MPLT require VP
Synch. If not, a visible Synch Pulse will roll through video of cameras not requiring
pulse.
The Installer menu has an option which allows users to save their system settings to
flash memory. This can be done by selecting the Save to User Defaults option. This is
useful if the configuration of the system is changed in error in the future. The user can
then restore the saved defaults using the Restore Saved Defaults option.
There is also a Restore Factory Defaults option which when selected, returns the
MegaPower LT to factory settings.
Restore Factory Defaults will erase any previously saved programming (i.e. there
will be no user programming to restore).
To select any of these options, use the down joystick command to move to the required
option and press the ENTER key to select it.
6 Installer Menu
S/W Ver 1.xx
6.1 System Options
6.2 Keyboard Priority
6.3 Dome Ping
VPSynch: DISABLED
Save to User Defaults
Restore User Defaults
Restore Factory Defaults
Return to Menu