VideoEdge Camera Handler Release Notes VideoEdge 4.2 Camera Handler v4.2.0.1022 In case of discrepancy, the information in this document supersedes information in other document(s), media(s) or provided verbally.
Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Tyco International Ltd. © 2013 and its Respective Companies.
General Purpose The purpose of this document is to provide a detailed list of supported manufacturers and manufacturers’ camera lines integrated and supported by the American Dynamics VideoEdge Network Video Recorder version 4.2 and the VideoEdge Camera Handler version 4.2. Cameras and Encoders supported and available with current version 4.
General Purpose 1-2 Camera Handler Release Notes
What’s New in This Release This camera handler release provides integration for the following cameras: • FLIR • illustra 210 • illustra 610LT • illustra 600/610 Telephoto FLIR VideoEdge Camera Handler is fully integrated with FLIR’s D, PT and F series of multi sensor, pantilt and fixed thermal security cameras.
What’s New in This Release American Dynamics VideoEdge Camera Handler is fully integrated with the illustra 210 standard resolution camera. In addition to the expansion of the illustra 600/610 series, there is support for the illustra 610LT and illustra 600/610 telephoto models.
Continual Support At any given time there is only one camera pack available for the VideoEdge NVR. This camera pack provides full support to all existing (updates and add-ons) and new cameras available for the VideoEdge NVR.
Continual Support 3-2 Camera Handler Release Notes
American Dynamics Camera specific release notes are available from Supported American Dynamics cameras: Video Encoders ADEIP8H, ADEIPM Fixed IP Cameras – General ADCIPEBPN, ADCIPEBPPE, ADCIPEBPPU, ADCIPEBN, ADCIPEBPE, ADCIPEBPU, ADCIPE33121CN, ADCIPE33121SN, ADCIPE33121CPE, ADCIPE33121SPE, ADCIPE33121CPU, ADCIPE33121SPU, ADCIPE3712OCN, ADCIPE3712OSN, ADCIPE3712OCPE, ADCIPE3712OSPE, ADCIPE3712OCPU, ADCIPE3712OSPU Fixed Camera Mini-Dome – illustra 210 Series ADCi210-D111, ADCi210-D011, ADCi210-D121, ADCi21
American Dynamics Bullet WDR Cameras ADCi400-B021, ADCi400-B022 ADCi400-B041 (with integrated IR illuminator) IP Speed Dome PTZ ADVEIPSD22N, ADVEIPSD22P, ADVEIPSD35N, ADVEIPSD35P Fixed Camera (Mini-Dome) – illustra 600/610 Series Mini-Dome 720p ADCi600-D111, ADCi600-D011, ADCi600-D121, ADCi600-D021, ADCi600-D321, ADCi600D131, ADCi600-D031, ADCi600-D141, ADCi600-D041, ADCi600-D341,.
ACTi Corporation Camera specific release notes are available from This version of the VideoEdge camera handler is fully integrated with ACTi Corporation line of IP cameras. ACTi has number of API’s (Application Programming Interface) camera handlers to communicate with their cameras. This version of the VideoEdge NVR is fully integrated with the ACM models (cameras using firmware version v3.13.16-AC) and TCM models (cameras using firmware version v4.11.09-AC).
ACTi Corporation Box Cameras TCM5311, TCM5611 Generic As ACTi Corporation continues to develop, enhance and release new cameras there may be a situation where a particular ACTi camera model is not on the drop-down list of supported cameras. This does not mean that the camera handler will not work. Using the ACTi-Generic model will query the device and will automatically determine its capabilities and model number.
Arecont Vision Camera specific release notes are available from VideoEdge camera handler is fully integrated with the Arecont Vision line of megapixel cameras including full support for the 180˚ and 360˚ lines of panoramic view cameras. Arecont Vision cameras operating system (firmware) is continually evolving; please make sure your camera is running the most current firmware available from Arecont Vision (available from http://www.arecontvision.
Arecont Vision Panoramic Mini-Dome Cameras AV8185, AV8185DN, AV8180, AV8360, AV8365, AV8365DN Note Each of the 8xxx cameras are comprised of four individual cameras housed together as a “single camera”. Please make sure you have sufficient camera licenses available with your VideoEdge NVR. When adding cameras to the NVR ensure that four camera slots are available (e.g.
AXIS Communications Camera specific release notes are available from VideoEdge camera handler is fully integrated with the AXIS communications line of IP cameras and video encoders. AXIS has number of API’s (Application Programming Interface) camera handlers to communicate with their cameras. The VideoEdge NVR is fully integrated with the VAPIX® API Version 2 (cameras using firmware version 4.xx) and VAPIX® API Version 3 (cameras using firmware version 5.xx).
AXIS Communications PTZ Cameras AXIS 212 PTZ, AXIS 212 PTZ-V, AXIS 213 PTZ, AXIS 214 PTZ, AXIS 215 PTZ, AXIS 215 PTZE PTZ Dome Cameras AXIS P5512, AXIS P5512-E, AXIS P5522, AXIS P5522-E, AXIS P5532, AXIS P5532-E, AXIS P5534, AXIS P5534-E, AXIS Q6032-E, AXIS Q6034, AXIS Q6034-E, AXIS 231D+, AXIS 232D+, AXIS 233D, AXIS M5013, AXIS M5014 Thermal Cameras AXIS Q1910, AXIS Q1910-E, AXIS Q1921, AXIS Q1921-E, Generic As AXIS Communications continues to develop, enhance and release new cameras there may be a sit
CBC Camera specific release notes are available from Supported CBC Cameras: Fixed IP MP1A, MP1DN, MP2A, MP2DN, MP3DN, MP5A, MP5DN Indoor Dome MP8D-L4 8-1
CBC 8-2 Camera Handler Release Notes
FLIR Camera specific release notes are available from In this release the VideoEdge camera pack is fully integrated with FLIR’s D, PT and F series, multi sensor, pan tilt and fixed thermal security cameras. The following cameras are supported with minimum camera firmware version nexus-serverGD_v2.5.9.17.
FLIR 9-2 Camera Handler Release Notes
Panasonic Corp Camera specific release notes are available from VideoEdge camera handler is fully integrated with the Panasonic line of IP cameras. Panasonic, generally, doesn't change the core API interface for their cameras. VideoEdge camera handler is based on Panasonic core API package version 1.28, supporting both WV and DG versions of the listed cameras. As Panasonic continue to release new cameras there may be instances where specific Panasonic cameras are not listed in the available camera pack.
Panasonic Corp Generic As Panasonic continues to develop, enhance and release new cameras there may be a situation where a particular Panasonic camera model is not on the drop-down list of supported cameras. This does not mean that the camera handler will not work. Using the Panasonic-Generic model will query the device and will automatically determine its capabilities and model number. This will work for all unlisted Panasonic IP Fixed cameras, PTZ cameras are not supported.
SONY Camera specific release notes are available from This version of VideoEdge camera handler provides full integration with the SONY line of Video Encoders and IP cameras. SONY has number of API’s (Application Programming Interface) camera handlers to communicate with their cameras. The VideoEdge NVR is fully integrated with SONY’s 3rd, 4th, and 5th generations of IP cameras.
SONY Fixed cameras (Minimum Camera Firmware Version 1.33) SNC-CH110, SNC-CH210 Mini-Dome (Minimum Camera Firmware Version 1.11) SNC-DH140, SNC-DH140T, SNC-DH240, SNC-DH240T,SNC-DH280, SNC-DH120, SNCDH120T, SNC-DH220T, SNC-DH160, SNC-DH260, SNC-DS10, SNC-DS60, SNC-DM110, SNC-DM160 Mini-Dome (Minimum Camera Firmware Version 1.23) SNC-DF50N, SNC-DF50P, SNC-DF80PN, SNC-DF80P, SNC-DF85N, SNC-DF85P Mini-Dome (Minimum Camera Firmware Version 1.31) SNC-DH220 Mini-Dome (Minimum Camera Firmware Version 1.
SONY PTZ Dome (Minimum Camera Firmware Version 3.14) SNC-RX550P Generic and Legacy As SONY continues to develop, enhance and release new cameras there may be a situation where a particular SONY camera model is not on the drop-down list of supported cameras. This does not mean that the camera handler will not work. Using the SONY-Generic model will query the device and will automatically determine its capabilities and model number.
SONY 11-4 Camera Handler Release Notes
Camera Specific Release Notes This section is a collection of camera release notes as provided with each camera release. This section provides detailed description for each manufacturer cameras, performance limitations and supported features.
Camera Specific Release Notes 12-2 Camera Handler Release Notes
American Dynamics 8 Channel IP Encoder (M&H) Supported Models ADEIP8H, ADEIP8M (Minimum Firmware - v3.1.4.6 kernel #9) Supported Key Functions • Video Streaming – Single and Dual • Video Codec – MJPEG, MPEG4 and H.264 and MPEG4 MJPEG • Audio Streaming – Audio Codec are AAC, G.711 ulaw and G.
American Dynamics 8 Channel IP Encoder (M&H) Limitations • Changing the video source requires reboot of the encoder. During the reboot, the device will not respond. • Changing the interlacing parameter would require the encoder to be restarted. During the reboot, the device will not respond. • Changing streaming parameters like bit-rate, quality, frame-rate, key frame interval and others would require the stream to be restarted, hence a small glitch in play out might be observed during this time.
American Dynamics Fixed IP Camera Supported Models Box Cams ADCIPEBPN, ADCIPEBPPE, ADCIPEBPPU, ADCIPEBN, ADCIPEBN, ADCIPEBPE, ADCIPEBPU Indoor Mini-Dome ADCIPE3312ICN, ADCIPE3312ISN, ADCIPE3312ICPE, ADCIPE3312ISPE, ADCIPE3312ICPU, ADCIPE3312ISPU Outdoor Mini-Dome ADCIPE3712OCN, ADCIPE3712OSN, ADCIPE3712OCPE, ADCIPE3712OSPE, ADCIPE3712OCPU, ADCIPE3712OSPU Supported Firmware • v1.
American Dynamics Fixed IP Camera Required Ports • Port 80 is for HTTP • Port 554 is for RTSP Default Username & Password • Username: admin • Password: 9999 Limitations • The camera will reboot when changing codec (audio or video), resolution, frame rate,key frame interval, video quality, audio volume, enable audio / audio in and any other audio / video properties. Reboots will take about 20 to 30 seconds and 1 minute to be back online. • Single HTTP stream to send audio/video interleaved MPEG4 video.
American Dynamics Fixed Camera (illustra 400 series) Supported Models illustra 400 seriesFixed IP cameras (box, bullet and mini-dome) Supported Firmware • v2.20 or later Supported Key Functions • Video Streaming – Single, Dual • Video codec – H.264 and MJPEG • Audio Streaming – G.711 ulaw and G.726, single stream only • Dry Contact Events – Single.
American Dynamics Fixed Camera (illustra 400 series) Limitations • The camera will reboot when changing codec (audio or video), resolution, frame rate, key frame interval, video quality, audio volume, enable audio / audioin and any other audio / video properties. The reboots will take about 20 to 30 seconds. • All audio and video streams will be lost when the camera reboots. All audio and video streams will then need to be re-established.
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) Supported Models Mini-Dome (illustra 210 series) ADCi210-D111, ADCi210-D011, ADCi210-D121, ADCi210-D021, ADCi210-D113, ADCi210D013, ADCi210-D123, ADCi210-D023 FIxed Camera Mini-Dome (illustra 600/610 series) Mini-Dome 720p ADCi600-D111, ADCi600-D011, ADCi600-D121, ADCi600-D021, ADCi600-D321, ADCi600D131, ADCi600-D031, ADCi600-D141, ADCi600-D041, ADCi600-D341, ADCi600-D113, ADCi600-D013, ADCi600-D123, ADCi600-D023, ADCi600-D323, AD
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) Supported Key Functions • Video Streaming • Audio Streaming – Supports G711mulaw stream (600/610/210). illustra 610LT does not support audio. • Dry Contact Events – Single camera is pulled for Dry Contact at 100ms interval (600/610/210). illustra 610LT does not support dry contact events.
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) • Port 554 is for RTP/RTSP Default Username & Password • Username: admin • Password: admin Limitations • When the primary and secondary streams are configured with the same codec, changing stream on the NVR may change the opposite stream to the one you wish to change. The illustra 600 primary and secondary streams configuration will not necessarily reflect stream one and stream two on the NVR.
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) • Although the NVR does not support changing the quality of H264, this can be managed through the camera web GUI. To support dual streams, it is recommended the interval between changing codec/resolution should be greater than 30 seconds. Otherwise the camera may keep rebooting. • Dry contact messages that have been lost on the NVR maybe received if the camera is set beyond camera FPS limitations.
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) • The illustra 210 models have no support for Region of Interest, Face Detection and Pseudo Multi Pass Encoding.
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610) 16-6 Camera Handler Release Notes
American Dynamics IP SpeedDome Supported Models ADVEIPSD22N, ADVEIPSD22P, ADVEIPSD35N, ADVEIPSD35P (Minimum Firmware - v2.0.0.645) Serial Number NVR will use the camera’s MAC address as the camera serial number. Supported Key Functions • Video Streaming 4 max • Video Codec – • MJPEG, MPEG4 and H.264 • Audio Streaming – Audio codecs are AAC, G.711 ulaw and G.711 alaw. No PCM audio stream • Mechanical Pan and Tilt and Optical Zoom • Dry Contact Events – Up to 4 dry contact events are support.
American Dynamics IP SpeedDome Required Network Ports • Port 5001 is for IDP (command and control) • Port 554 is for RTSP Default Username & Password • User name: admin • Password:admin Limitations • Only one audio stream (G711aulaw or G711mulaw) can be used at one time • Dual video streaming supports H.264/MJPEG and MPEG4/MJPEG, but does not support H.264/MPEG4.
American Dynamics IP SpeedDome Known Issues • When using IP Dome firmware 2.0.0.645 for streaming H264 only, users should not use rewind instant play back with victor client. Users should use Search and Retrieve, or don’t configure using a H264 stream. Refer to QC 10255 for more info. • The default values for some properties defined on NVR are different from camera’s default. • The dry contact state always returns unknown.
American Dynamics IP SpeedDome 17-4 Camera Handler Release Notes
ACTi Corporation Supported Key Functions • Video Streaming • Query Device • Dry Contact Events • Reboot Unsupported Key Functions • Audio Streaming • PTZ • Power Off • Get Log • Restore Factory Defaults • Find Device Minimum Firmware • For ACM models – v3.13.16-AC • For TCM models – v4.11.
ACTi Corporation Default Username & Password • Username: admin • Password: 123456 Supported Resolution All resolutions less than or equal to 1280x720 are dynamically acquired by the camera. Limitations • Resolutions larger than 720p are unsupported due to an incompatible algorithm used by the camera when the stream's resolution is larger than 720p.
ACTi Corporation • The ACTi generic camera driver will not support the following features: • Image settings: •Lens day/night mode •Brightness •Contrast •Sharpness • H.264 stream • Resolutions larger than 720p are unsupported. Should a camera support a higher resolution, this will not be available via NVR. Known Issues • The TCM3511 has an issue with Reverse playback in the VEClient. The user will experience a stutter with the H.264 stream due to the first key frame being received every second.
ACTi Corporation • Camera may crash when POE/power cable are unplugged and plugged in again. When the issue happens, the camera's web GUI may display "01072915212: Rtsp:Error. Create socket 01072915214:Rtsp:Error. create socket". Resolution: Power Cycle first. If problem persists, carry out hardware reset. • Sometimes the camera’s web GUI will report “Error: Streaming Engine is not running”, when the issue happens there is no stream given out. The camera can be restored after a manual reboot.
Arecont Vision Support Models Panoramic IP (Minimum Firmware Version) AV8180 (65010), AV8185 (65043), AV8360 (65010), AV8365 (65043), AV8185DN (65166), AV8365DN (65166) Supported Key Functions • The Arecont Vision AV8xxx employs four, two-megapixel cameras in 180˚ or • 360˚ panoramic views. Models are available in a variety of options including H.264 • or MJPEG video formats, Day/Night, Heater/Blower, recessed or IP66 housings.
Arecont Vision Default Username & Password • Username: admin • Password: Limitations • The AV8xxx will be viewed with Victor Client. Not all functionality is supported by the Web-Client • VideoEdge Version 4.0 had a limitation for motion detection data generation of M-JPEG stream with video resolution greater than 4CIF/D1. VideoEdge version 4.1 increases the resolution to 1280x960 supporting second stream from a megapixel camera. • VideoEdge 4.1 (as with VideoEdge 4.
Arecont Vision • Due to the camera limitation, the bitrate and quality cannot be set through the camera’s web interface. The bitrate and quality values have to be included in the RTSP URL for them to work. • Due to NVR 4.1 motion detection only handling resolution up to 1280x960 for AV1XXX, AV8XXX, AV2100, AV2105 and AV2110, motion detection can only handle resolution as half.
Arecont Vision Due to camera firmware defect, the camera does not return the full model name, the NVR cannot support the daynight and auto Iris settings for all the Arecont cameras. The settings can be configured in the settings via the camera web GUI. (Note: Please refer to the Arecont Vision Camera Release Notes Considerations published by Arecont Vision for additional information.
Arecont Vision AV1310 AV1315 AV1325 AV1355 AV2100 AV2105 AV2110 AV2115 AV2125 AV2155 AV2805 AV2815 AV2825 AV3100 AV3105 1280 x 1024 1280 x 1024 1280x1024 1280 x 1024 1600 x 1200 1600 x 1200 1600 x 1200 1920 x 1080 1920 x 1080 1600 x 1200 1920 x 1080 1920 x 1080 1920x1080 2048 x 1536 2048 x 1536 AV3110 AV3115 2048 x 1536 2048 x 1536 AV3125 2048 x 1536 AV3155 2048 x 1536 AV5100 AV5105 2560x1920 2560 x 1920 AV5110 AV5115 2560 x 1920 2560 x 1920 AV5125 2560 x 1920 AV5155 2560 x 1920 1280 x 1024
Arecont Vision 19-6 Camera Handler Release Notes
Axis Communications Supported Key Functions • Video Streaming – Single and Dual • Video Codec – MJPEG, MPEG4 and H.264 • Audio Streaming • Audio codec supported depends on camera functionality • Dry contact events Required Network Ports • Port 80 is for HTTP • Port 554 is for RTSP Default Username & Password • Username: root • Password: pass Note These are associated with password group 0 (default) Supported Camera API and Models • Camera API: VAPIX 2 and VAPIX 3.
Axis Communications Camera Serial Number NVR will use the camera’s MAC address as the camera serial number. Supported Key Functions • Video Streaming – Single and Dual • Audio Streaming – Audio codec supported depends on the camera. • PTZ – Applies to cameras that have mechanical Pan and Tilt and Optical Zoom. • Dry Contact Events • Query Device • Reboot Device Video/Audio Stream Feature • For VAPIX 3 cameras, all MJPEG, MPEG-4 and H.264 streams can have different frame rates, resolution and quality.
Axis Communications • Q1755 without PT head installed will still show up as a PTZ camera in NVR. However, none of the PTZ functions will work. This limitation could apply to all cameras that has built-in PT/PTZ head support. • Older versions of the AXIS handler may have set the “exposure”, “input gain”, “wdr” and other parameters on some AXIS cameras to invalid values. • The camera’s web interface can be used to determine whether the camera parameters have been set to invalid values.
Axis Communications recorded playback by Victor Client, a blank image appears for a very short period at the point in time where the audio codec was changed. • If the customer needs to change the active state of a dry contact input then it should be changed before adding a corresponding alarm sensor otherwise an alarm/alert may be caused as a result of changing the active state. • For H.264 video streams, the NVR web client does not allow the H.264 video quality and H.
Axis Communications • The Sequence portion of the NVR web client PTZ page may appear or disappear when the page is refreshed. • If the MJPEG quality level is set to 100 at high resolutions ( 1920x1200 for example ) then live viewing problems ( high latency, momentary loss of video, etc) may be observed in a Victor Client surveillance screen if that workstation is also trying to live view using the NVR web client.
Axis Communications 20-6 Camera Handler Release Notes
CBC Supported Models MP1A, MP1DN, MP2A, MP2DN, MP3DN, MP5A, MP5DN, MP8D-L4 Supported Key Functions • Video Streaming – Single and Dual • MJPEG and H.264 video codecs • Query Device Unsupported Key Functions • PTZ Operation • Audio Streaming • Dry Contact Events • Power off devices • Get device log • Find Devices • Reboot • Reset to factory default Camera Serial Number NVR will use the cameras MAC address as the camera serial number.
CBC Required Network Ports • Port 80 is for HTTP • Port 554 is for RTSP Default Username & Password • Username: admin • Password: Supported Resolution Model Max Resolution Resolution Options on NVR MP1A MP1DN MP2A MP2DN MP3DN MP5A MP5DN MP8D-L4 1280x1024 1280x1024 1600x1200 1600x1200 2048x1536 2560x1920 2560x1920 1600x1200 1280x1024 / 640x512 1280x1024 / 640x512 1600x1200 / 800x600 1600x1200 / 800x600 2048x1536 / 1024x768 (For MJPEG – only 1024x768) 2560x1920 / 12
CBC Considerations CBC model cameras with firmware version 62414 will be configured as their Arecont equivalent, also taking the Arecont model. In firmware 64238 CBC model cameras will be identified as a CBC model, but for codec parameters. CBC model cameras still correspond with Arecont model cameras.
CBC 21-4 Camera Handler Release Notes
FLIR Supported Key Functions • Video Streaming – Single and Dual • PTZ – Applies to cameras that have mechanical Pan and Tilt and Optical Zoom. • Query Device • Reboot Device Unsupported Key Functions • Find devices • Power-off device • Get device log • Reset to factory default • Digital PTZ – Applies to cameras that support digital PTZ. • Audio Streaming Camera Serial Number NVR will get the serial number from each camera.
FLIR Default Username & Password • Username:admin • Password:indigo Firmware Requirements Nexus Server F, D & PT-Series’ Nexus server must be updated to v2.5.9.17 or later. If an older Nexus server version is used, changing video channel parameters on the NVR will require the camera server to be manually restarted through the cameras web configuration tool. F, D & PT-Series’ Note: v2.5.9.17 is in beta FLIR Camera Firmware must be v2.5.9.15 or later.
FLIR Limitations 1 2 3 4 5 Model Known Camera Limitations F-Series D-Series PT-Series F-Series D-Series PT-Series F-Series D-Series PT-Series F-Series D-Series PT-Series Due to a necessity of FLIR camera video hardware re-start, it may take about 48 seconds for the video stream to come back after any stream property changes. Camera may take more than 5s to respond to a CGI command, this may cause NVR to timeout. This is camera performance issue.
FLIR F-Series Video image streamed from a F-Series camera always has a big border when being displayed on NVR and Victor Client.
FLIR 3 Models: PT-Series/D-Series/F-Series Steps for enabling the Second stream on the PT-Series/D-Series Before setting a FLIR camera’s IP address on NVR, the user must enable the second stream for each camera LEN on the PT-Series/D-Series/FSeries.
FLIR Troubleshooting Error Message on NVR Possible root causes NVR Failed to add camera. -NVR Lost communication Ping camera IP to make sure camera is connected network. with Camera Open a web browser. Issue “ServerWhoAmI” CGI command, “ - Camera is offline SERVERWhoAmI” If camera responds the above CGI with no error, this means - Camera server is not communication between NVR and Camera communication running through port 8080 has been established.
Panasonic Supported Key Functions • Video Streaming – Single and Dual • Video Codec – MJPEG, MPEG4 and H.
Panasonic Supported Camera API & Models Model Minimum Camera Firmware Version NW484 NW502S, NP502 1.61E0 1.10 NW960, NW964, NS950, NS954 SF332, SF335, SF336 SF342, SF346 SW352 SW355 NP244, NF284 NS202, NS202A SC384 SC385, SW395 SP102 SP105 1.61E0 1.03 1.34 1.06 1.04 1.60 2.70 1.05 1.01 1.01 1.01 SP302, SP305, SP306 NP304, NF302 NP244 Generic Fixed – for all unlisted Panasonic IP Fixed Cameras, not PTZ 1.04 1.61E0 1.
Panasonic The specific Audio Video stream feature characteristics by model families are: Model Audio/Video Stream Feature NW484, NW960, NW964, NS950, NS954, NP304, NF302, NS202, NS202A, NP244, NF284 NW502S, NP502, SF332, SF335, SF336, SP302, SP305, SP306, SC384, SC385, SW395, (SF342, SF346 SW352, SW355)Generic Fixed SP102, SP105 MJPEG and MPEG4 Support only 1 video stream in order to achieve high frame rate MJPEG, MPEG4 and H.
Panasonic • Due to camera performance limitations when using dual stream out of a M-JPEG/MPEG4/H.264 camera, the camera might not deliver the requested frame rate. Please refer to Panasonic product catalog for more details • Fractional frame rate support is not supported with the VideoEdge NVR and will be reported as “unknown” • NW502S and NP502 max frame rate for dual stream is 15FPS at VGA and 10FPS at QVGA • SF332, SF335, SF336, SP102, SP105, SP302, SP304, SP305 and SP306 are 1.
Panasonic Settings, Video Processing Amp) is not available. Some camera models, including SC384, will display Back Light Compensation as “Unknown” and other models will display “0”. Note Please refer to Panasonic cameras release notes published on the Panasonic website for more information about Panasonic cameras and limitations.
Panasonic NP304, NF302 NS202, NS202A NP244, NF284 SC385, SW395 (SC384) NP244, NF284, NS202A, NW484, NS954, NW964, NF302, NP304 23-6 Picture quality is 1.3 mega pixels; there are two aspect ratios 4:3 & 16:9. MPEG-4 is not available when 16:9 is selected When MPEG-4 transmission is set to On, the maximum frame rate for MJPEG is 5fp The maximum MPEG4 resolution is 1280x960.
Panasonic Generic SP302, SP305, SP306 , (SF342, SF346) SP102, SP105 Does not support any other settings other than video, audio and event stream related functions The mode settings of H.264 and MPEG-4 operation need to be explicitly set at the camera.
Panasonic 23-8 Camera Handler Release Notes
SONY Supported Key Functions • Video Streaming – Single and Dual • Video Codec – MJPEG, MPEG4 and H.264 • Audio Streaming • Audio codec supported depends on camera functionality • PTZ – applies to cameras with mechanical pan, tilt and optical zoom • Dry contact events – HTTP server push functionality is available for increase in efficiency and speed of obtaining dry contact events.
SONY • Port 554 is for RTSP Default Username & Password • Username: admin • Password: admin Limitations • Relative Iris is not supported, which means Victor client won’t be able to adjust the Iris. However the absolute Iris adjustment is available through NVR or Camera web page. • Digital PTZ are not supported. • SNC-CS50N/P, DF50N/P, SNC-DF80N/P, DF85N/P, RX530N/P, SNC-RX550N/P and RX570N/P Due to SONY camera performance limitation on H.264 stream the camera can support only 1 video stream.
SONY such as Wide-Dynamic-Range (which, in some implementations, may cut the maximum available frame-rate in half). • The result of serious over-configuration can have different results on different camera models. In some cases, the secondary resolution and frame-rate values that are too large are simply replaced with smaller values.
SONY 24-4 Camera Handler Release Notes