INSTRUCTION MANUAL 20-INCH TFT-LCD MONITOR ADMNLCD20 Please read this manual thoroughly before use, and keep it handy for future reference.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
-2- FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
-3- IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. 10 OWER CORDS -- Do not allow anything to rest on the power cord. Do not locate video monitor or equipment where the cord will be abused by persons walking on it. 2. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. 11 HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment. 3.
-4- TABLE OF CONTENTS l Warning……………..…………………………………………………………………… 2 l FCC Compliance Statement………………………………………………………….. l Important Safeguards………………………………………………………………….. 4 l Table Of Contents………………………………………………………………………. 5 l Features……….…………………………………………… ..………………………….. 6 l Operating Instructions-Controls ……………………………………………………….. 7 l Backside Connections………………………………………………………………… .. 8 l Remote Control ………………………………………………………………………… . 9 l OSD Architecture……………………………………………………………………… 3 12 A.
-5- Feature s l 20-inch LCD monitor with multiple inputs (Composite video, Y/C (SVHS) and D-sub computer) l High brightness of 500 cd/? l High contrast of 480 :1 l Wide viewing angle of 160 degrees, both vertically and horizontally l Fast LCD response time of 16ms, allowing excellent rendering of motion l Latching power supply automatically restores power after interruption or remote switching l Control button lock-out using the OSD, to minimize tampering in public view applications l Remote
-6- Operating Instructions-Control 6 5 43 2 1 1. Power Monitor power ON / OFF. At OFF mode, monitor will be at standby status. Green Light – Power On Red Light – Standby mode 2. 3. Adjust / Increase or decrease the value on OSD menu. Increase value or turn ON / OFF function Decrease value or turn ON / OFF function 4. Item Chose sub menu from Audio / Video / Image. 5. Menu OSD menu ON / OFF control. 6.
Select input signal from AV1, AV2, S-Video or PC. -7- Backside Connections A.
-8- Remote Control Key Function Power Turn ON / OFF monitor. At OFF mode monitor will be standby status. Scan Provide CATV channel auto scanning. Scan Set Sel. Power (Is there a TV tuner in this model?) Set (Restricted Channel S etting) TV 1 2 3 4 5 6 Channel lock for restricted program. (Unlock / Lock PC channel must require password, default password: 0000). AV1 7 8 9 +100 AV2 0 Sel. (Restricted Channel Setting) Select restricted channels programmed in Set.
-9- Remote Control Jump Return to previous channel. Memory Channel memory for TV/CATV. Select Selecting channel from memorized channels. ? Select channel forward. ? Select channel backward. Menu OSD menu ON / OFF and selection. Item Chose sub menu from Audio / Video / Image list. + /Increase or decrease the value on OSD menu.
- 10 - + Volume Used adjust +/- to increase / decrease volume.. + Increase volume value - Decrease volume value Channel ? Select channel forward. ? Select channel backward. 1 ~ 10 / +100 Number keys for TV/CATV channels.
- 11 - OSD Architecture A. Audio Function Audio Volume Balance Treble Bass Press the MENU button will bring up the OSD Menu. Press MENU a gain to select AUDIO. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. - + Note: In remote control, press key to adjust. (After adjustment, the monitor will store new settings) Volume Controls built-in speakers’ output volumes. Note: Volume control can also be adjusted by hot key.
- 12 - OSD Architecture B. Video Function Video Contrast Brightness Backlight Color Tint Color Temperature Sharpness CCD Mode Display On/Off Recall Under AV1, AV2, S-Video mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select VIDEO. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. Note: In remote control, press - + key to adjust.
- 13 - OSD Architecture Contrast Permits adjustment o f contrast between light and dark areas of the picture. E xample: Setting Slide bar Brightness Adjusts the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to “brighten” the picture without causing noises and foreheads to turn white. Back Light Adjusts panel backlight luminance.
- 14 - OSD Architecture CCD Mode If video signal source directly comes from CCD camera, using CCD Mode is suggested to obtain better picture performance. Display Displays video source title. RECALL Sets monitor to the original factory setting.
- 15 - OSD Architecture C. Image Function Image Auto Contrast Brightness Backlight H-Position V-Position Clock Phase DOS Mode Color Temperature White Balance Display Under Image mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select IMAGE. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. Note: In remote control, press + key to adjust.
(After adjustment, the monitor will store new settings) - 16 - OSD Architecture Auto Auto detect screen detail data such as clock and phase. Contrast Permits adjustment for contrast between light or dark areas of the picture. Brightness Adjusts the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to “brighten” the picture without causing noises and foreheads to turn white.
- 17 - OSD Architecture Dos Mode Supports picture enhancement when using under DOS mode. Color Temperature Selects 9300 or 6500 color temperature for display. White Balance Allows the picture white balance adjustment. Display Displays video source title. Recall Sets monitor to the original factory setting.
- 18 - LCD monitor Mounting Guide A. Desktop Adjust the angle of LCD to provide comfortable viewing B. Wall mount able using two methods: 1) Using the 200 mm pre-cut holes 2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. C.
- 19 - Connecting Device DVD or other video source Loop out to another video device Camera or other video source Camera or other video source PC a. Connect PC to Monitor through VGA connector as shown on the above picture b. Connect External device such as DVD or Game Player to Monitor as shown on the above picture c. Connect CCD Camera 1 and 2 to Monitor through Video Input 1 and 2 (BNC Connector) as showing on the above picture d.
- 20 - Specification Model LCD Panel 20 .1 inch TFT, TN Mode Display Mode 3D De-interlace Input Filter 3D Comb filter Display area 408 x 306mm Resolution 800 x 600 Brightness 500 cd/m 2 @6mA Contrast ratio 480:1 Response Time View angle L/R U/D Input Signal 16ms typ.
- 21 - Appendix es A. TROUBLE SHOOTING Problem: 1.No power 2.No video or audio 3.Bad video or audio 4.Image not stable 5.Abnormal line 6.Ghost image 7.Desired video disappears Checking: Power-cord connecting Power-on LCD?correctly? (Confusing) Change to right input channel? Check signal cable? Any interrupt from other devices? Adjust video control on OSD? Adjust video source? B Package List A. ADMNLCD20 20” LCD Monitor x1 B. American Power Cord x1 C . Europe Power Cord x1 D .
E.
- 23 -