Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 10
Figure 8 Inserting the three tapping screws into the camera body
- End -
Procedure 3 Adjusting the camera position
The camera has three axes to adjust the field of view for different Applications (Figure 9). While
screening live view on your monitor, adjust the axes as per the information below.
Figure 9 Adjusting the camera position
• Pan Adjustment (A – Figure 9) Rotate the lens base until satisfied with the field of view.
Please DO NOT rotate over the default limit of ˃355°.
• Tilt Adjustment (B – Figure 9) Tilt the camera lens within the certain range (70°) to your
desired field of view.