Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
11 8200-1929-03 A0
• Horizontal Rotation (C – Figure 9) Rotate the 3D assembly in the lens, DO NOT turn the
assembly more than the limit (± 355°) as this may result in the internal cables becoming
twisted, disconnected, or broken.
- End -
Procedure 4 Assembling the camera
Step Action
1 Place the camera top cover (2) (Figure 10) onto the camera body (1) (Figure 10).
2 Use the Torx wrench to securely attach the three Torx screws located on the camera top
cover (2) (Figure 10).
Figure 10 Attaching the camera top cover
- End -
Procedure 5 Powering up the camera
• 12Vdc: Connect the 12Vdc cable to the DC 12V terminal.
OR
• PoE: Connect the RJ-45 jack to a PoE compatible network device that supplies power
through the Ethernet cable.
- End -