Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 14
Quick reference
• Default IP: 192.168.1.168 (DHCP enabled)
• Default Username: admin
• Default Password: admin
• Power: PoE (IEEE 802.3af Class 3)
Figure 12 Camera parts and connections
Table 13 Camera parts and connections descriptions
Name Description
A
DC 12V Port
For powering on the camera through the DC12V power source.
B
RJ-45 Ethernet /
PoE Port
Connect an Ethernet cable terminated with RJ-45 connector to the
PoE RJ-45 port for both power supply and network connectivity
purposes simultaneously.
C
Mounting Bracket
To mount the camera onto different environments, the mounting
bracket is designed with three axes for flexible adjustment.
D
Internal Interface
Cover
Use a screwdriver to loosen the 2 screws and open the cover to
access the internal interfaces including the “RESET” and
“DEFAULT” button, “Micro SD Card Slot”, and LED’s.
E
Protection Shield
Hood
For minimizing the effects of rain and sunlight on image quality.