Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
15 8200-1929-03 A0
Figure 14 Camera internal interface and descriptions
Table 15 Camera internal interface descriptions
Name Description
Reset Button
Press and release to reboot the camera.
Signal LED (RED) Indicates network data is being transmitted.
Micro SD card slot Insert a micro SD card into the slot for recording and file storage.
Power LED
(GREEN)
Indicates camera is powered on.
Default Button
Press the button for 6 seconds to restore to the factory default set-
tings.
Procedure 6 Mounting the camera
Step Action
1 Place the mounting template on the mounting surface and drill three 6mm (0.25’’) holes.
2 Insert the three plastic anchors (1) (Figure 16) into the three holes.
3 Place the camera on the mounting surface and align the three holes on the camera with the
three holes on the mounting surface.
4 Insert the three tapping screws (2) (Figure 16) into the three holes on the camera body and
using the screw driver securely attach the camera to the wall / ceiling.