Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 35
Configuring the Web Video Stream
Adjust the settings for each video stream.
Procedure 22 Configure the Video Stream settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Video Streams Settings tab in the Basic Configuration menu.
3 Select either Stream 1 or 2 from the Stream Number drop-down menu.
4 Select the required Codec from the drop-down list:
• H264
• H265
• MJPEG
The default setting is ‘H264’.
Note:When you select H264 you can set the Profile. If you do not select either of these options then
continue at step 6 below.
5 Select the required Profile from the drop-down list:
• Main
• High
The default setting is ‘Main’.
6 Select the required Resolution from the drop-down menu.
The resolutions available depend on the type of camera sensor (megapixel).