Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
36 8200-1929-03 A0
Table 28 2MP Camera Stream Set A (all resolution, codes and frame rate combinations of Stream 1
and 2 are valid)
Normal Mode
Resolution Description
Max FPS
TWDR Off TWDR
Stream 1
h.264,
h.265,
MJPEG
1920 x 1080
1600 x 900
1280 x 720
1024 x 576
960 x 540
800 x 480
640 x 360
480 x 270
320 180
(1080p) 16:9
(HD+) 16:9
(720p) 16:9
(PAL+) 16:9
16:9
16:9
(mHD) 16:9
16:9
16:9
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Stream 2
h.264,
h.265,
MJPEG
1920 x 1080
1600 x 900
1280 x 720
1024 x 576
960 x 540
800 x 480
640 x 360
480 x 270
320 x 180
(1080p) 16:9
(HD+) 16:9
(720p) 16:9
(PAL+) 16:9
16:9
16:9
(mHD) 16:9
16:9
16:9
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Note:A maximum of three concurrent streams are supported by the camera. This includes shared
streams.
7 Use the slider bar to select the Frame Rate (fps).
The settings for the 2MP cameras are:
• Stream 1 - 1 - 30 fps, default 30 fps.
• Stream 2 - 1 - 30 fps, default is 30 fps.
Note:FPS varies depending on other features - refer to the Essentials Gen 4 Release Notes for
further information.
8 If H264 or H265 has been selected in step 4 then you can adjust the GOP Length [1-60].
Use the slider bar to select the GOP Length [1-60].
The default setting is 30.
9 If MJPEG has been selected, MJPEG Quality is enabled. Use the slider bar to select the
MJPEG Quality.
The default setting is 50.
OR