Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 37
10 If H264 or H265 has been selected in step 4, Rate Control is enabled. Select the required
Rate Control by selecting the radio buttons:
• VBR (Variable Bit Rate)
• CBR (Constant Bit Rate)
• CVBR (Constrained Variable Bit Rate)
The default setting is ‘CVBR’.
a If you select VBR, VBR Quality is enabled. Select the required VBR Quality from the
drop-down menu. The default setting is High.
• Highest
• High
• Medium
• Low
• Lowest
OR
b If you select CBR , CBR Bit Rate is enabled. Use the slider bar to select the CBR Bit
Rate. The default setting is 4000.
OR
c If you select CVBR, Max Bit Rate is enabled. Use the slider bar to select the Max Bit
Rate. The default setting is 8000.
- End -
Picture Basic
Adjust Picture Rotation, Focus / Zoom and Exposure displayed in the video pane.
Picture Rotation
Configure the orientation and corridor mode settings. Both settings are optional.
Procedure 23 Configure Orientation Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select the required Orientation setting:
• Mirror
• Flip
Mirror and Flip settings are selected by default. The video pane updates to display the new
settings.
Note:When wall mounting the camera you should select Flip and Mirror to correct
the lens orientation.
- End -