Installation Guide

Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 45
On-Screen Display (OSD)
Within OSD you can set enable or disable camera name and time display.
Procedure 37 Display or Hide the Camera Name OSD
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the OSD tab in the Basic Configuration menu.
3 In the Camera Name section, select the Enable check box to display the camera name in
the OSD.
OR
In the Camera Name section, clear the Enable check box to hide the camera name in the
OSD.
The default setting is ‘Disabled’.
4 In the Camera Name section, select the Location drop-down menu to select where the
camera name is displayed on screen.
- End -
Procedure 38 Display or Hide the Camera Time OSD
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the OSD tab in the Basic Configuration menu.
3 In the Date Time section, select the Enable check box to display the camera name in the
OSD.
OR
In the Date Time section, clear the Enable check box to hide the camera name in the OSD.
The default setting is ‘Disabled’.
4 In the Date Time section, select the Format drop-down menu to select if the date or time or
both should be visible on screen.
The default setting is ‘Time'.
- End -
Procedure 39 Display or Hide the User Defined OSD
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the OSD tab in the Basic Configuration menu.
3 In the User Defined section, select the Enable check box to display the camera name in
the OSD.
OR
In the User Defined section, clear the Enable check box to hide the camera name in the
OSD.