Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
47 8200-1929-03 A0
Video Menu
When you select the Video menu, the Streams page displays, as seen in Figure 30 on page 47.
Figure 30 Video Menu
The Video Menu provides access to the following camera settings and functions:
• Streams
• Picture Settings
• Date / Time / OSD
• Privacy Zones
Streams
You can configure up to two independent video streams on the camera: Stream 1 and Stream 2.
Alarm Video
Edge Recording
Camera can directly record specific events (MD and Face detection) directly to Micro SD card. User
can chose either Stream 1 or 2 to be recorded. When setting up motion detection on the camera, both
streams can be used. Alarm Video is configured in the Edge Recording > Record Settings menu.