Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 48
Integration with other Illustra API Clients
You can configure the 2 video streams through the Web User Interface, as detailed here, or through
the Illustra API interface. Changes made to the streams through either method are applied and the
video displays according to the configuration.
Opening the Web User Interface live video allows the stream to be shared with the Illustra API and
will minimize the impact on camera resources.
Configuring the Video Stream
Adjust the settings for each video stream.
Procedure 40 Configure the Video Stream settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Video Streams Settings tab in the Basic Configuration menu.
3 Select either Stream1 or 2 from the Stream Number drop-down menu.
4 Select the required Codec from the drop-down list:
• H264
• H265
• MJPEG
The default setting is ‘H264’.
Note:When you select H264 you can set the Profile. If you do not select either of these options then
continue at step 6 below.
5 Select the required Profile from the drop-down list:
• Main
• High
The default setting is ‘Main’.
6 Select the required Resolution from the drop-down menu.
The resolutions available depend on the type of camera sensor (megapixel).