Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 50
10 If H264 or H265 has been selected in step 4, Rate Control is enabled. Select the required
Rate Control by selecting the radio buttons:
• VBR (Variable Bit Rate)
• CBR (Constant Bit Rate)
• CVBR (Constrained Variable Bit Rate)
The default setting is ‘CVBR’.
a If you select VBR, VBR Quality is enabled. Select the required VBR Quality from the
drop-down menu. The default setting is High.
• Highest
• High
• Medium
• Low
• Lowest
OR
b If you select CBR , CBR Bit Rate is enabled. Use the slider bar to select the CBR Bit
Rate. The default setting is 4000.
OR
c If you select CVBR, Max Bit Rate is enabled. Use the slider bar to select the Max Bit
Rate. The default setting is 8000.
- End -
Picture Settings
Picture Basic
Adjust the Picture Rotation, Focus / Zoom, Exposure and White Balance settings.
Picture Rotation
Configure the orientation and corridor mode settings. Both settings are optional.
Lens Calibration
Use the lens calibration process to recover focus and zoom.
Procedure 41 Configure Orientation Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Video menu.
3 Select the required Orientation setting:
• Mirror
• Flip
Mirror and Flip settings are not selected by default. The video pane updates to display the
new settings.