Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 52
Exposure
Configure the exposure settings for the camera.
Procedure 44 Configure Exposure Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Settings tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
4 Select the Exposure Mode from the drop-down menu:
• Auto
• Manual
• Shutter Priority
5 Select the Exposure Method from the drop-down menu:
• Full Picture Weighted
• Upper
• Lower
• Center Weighted
• Spot
• Left
• Right
The default setting is center weighted.
6 Select the Min Exposure (sec) from the drop-down menu.
The default setting is 1/10000s.
7 Select the Max Exposure (sec) from the drop-down menu.
The default setting is 1/7.5s.
8 Select the Exposure Offset (F-stops) from the drop-down menu.
The default setting is 1/8s.
9 Select the Exposure Offset (F-Stops) from the drop-down menu.
The default setting is 0.
10 Select the Max Gain (db) from the drop-down menu.
The default setting is 45db.
11 Select Exposure (sec) from the drop down.
12 The Default is 1/30.
13 Select Manual Gain from the drop down.
14 The Default is 0db.
15 Select the Frequency radio button for either 50Hz or 60Hz.
The default setting is 60Hz.
16 Select or clear the check box for Flickerless Mode.
This feature is not selected by default.