Installation Guide

Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 60
Procedure 59 Enable/Disable a Privacy Zone
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Privacy Zones from the Video menu.
The Privacy Zones tab displays.
3 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
4 Select the Enabled check box to enable the privacy zone feature.
OR
Clear the Enabled check box to disable the privacy zone feature.
Note:Disabling zones will not delete configured zones, it hides them from Live
video.
- End -
Defining a Privacy Zone
Create a privacy zone on the camera.
Procedure 60 Define a Privacy Zone
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Privacy Zones from the Video menu.
3 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
4 Enable Privacy zones as per procedure 59.
5 Select the desired colour for the Zone overlay.
6 Click on the edit pencil button. Click and drag on the camera picture to define an area for the
privacy zone.
7 Release the mouse button.
The selected privacy area will turn yellow.
8 Select Add to save the current privacy zone.
9 To reselect an alternative area for the privacy zone select Cancel and repeat from step 4.
- End -
Deleting a Privacy Zone
Delete a privacy zone from the camera.
Procedure 61 Delete a Privacy Zone
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.