Installation Guide

64 8200-1929-03 A0
FTP
Configure the FTP settings for the FTP server. This is required to send video files from triggered
analytic alerts. FTP must be configured to enable FTP video alerts when using analytics. You can
configure FTP settings through the Network menu.
Procedure 64 Configure FTP Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select the Enable FTP check box to enable FTP.
OR
Clear the Enable FTP check box to disable FTP.
The default setting is ‘Enabled’.
Note:When in Enhanced Security mode, enabling FTP requires the admin account
password.
5 Enter the IP address of the FTP Server in the FTP Server text box.
6 Enter the FTP Port in the FTP Port text box.
7 Enter the FTP username in the Username text box.
8 Enter the FTP password in the Password text box.
9 Enter the FTP upload path in the Upload Path text box.
Note:
Refer Test the SMTP Settings on page 63 to confirm that the FTP settings are working as
expected.
- End -
File Transfer Rate
You can limit the File Transfer Rate and assign a max transfer rate to manage the amount of FTP
bandwidth used.
Procedure 65 Configure the FTP Transfer Rate
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select the Limit Transfer Rate check box to limited the FTP transfer rate.
OR
Deselect the Limit Tranfer Rate check box to disable limited FTP transfer.
The default setting is ‘Enabled’.