Installation Guide

66 8200-1929-03 A0
5 Select the Email check box to send an e-mail to the email address configured in the
Configure SMTP Settings procedure.
6 Select the FTP check box to send a video file to the FTP details configured in the Configure
FTP Server Settings procedure.
Note:
1. If you select Record, the AVI clip is saved to the micro SD card and it has to be
removed from the camera to view the video file.
2. AVI clips can only be sent through FTP if a micro SD card has been installed and
FTP has been selected.
3. The selected pre and post event duration buffer is included in any video clips sent
through FTP.
- End -
Editing a Event Action
Modify the details of an existing event action.
Procedure 68 Edit an Event Action
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Actions from the Events and Actions menu.
3 Select an entry on the event actions list, you can edit the following:
• Name
• Record - Enable/Disable
• Email - Enable/Disable
• FTP - Enable/Disable
- End -
Analytics
Analytics is a feature which detects and tracks objects in video. Analytics supported are Region of
Interest, Motion Detection and Blur Detection.
Region of Interest (ROI)
A region of interest is a defined area of the camera view which considered to be higher priority than
areas of non-interest. For example, in secure environments, areas of potential activity could be a
specific door or window. They are specified by drawing a rectangular overlay on the video stream.
The overlay is highlighted in green and an OSD is displayed outlining the size % for the x and y axis.
Up to five regions of interest can be configured, all of which can be enabled / disabled.
Procedure 69 Configure a Region of Interest
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
The ROI tab displays.