Installation Guide

Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 69
4 Select the Enable motion detection checkbox to enable Motion Detection on the camera.
OR
Clear the Enable motion detection checkbox to disable Motion Detection on the camera.
5 Select Apply to save.
- End -
Blur Detection
The camera generates an alarm and then takes the action you specified during configuration when
the Blur Detection feature is enabled and the camera detects incidents that make the video image
blur, such as: redirection, blocking, or defocusing.
When you enable Blur detection, it has a polling period of roughly 1 minute.
A Blur Detection start fault is raised when blur has been detected at 60 successive polling periods of
1 second (up to 1 minute).
Procedure 73 Enable Blur Detection
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
3 Select the Blur Detection tab.
The Blur Detection Configuration pane displays.
4 Select the Enable Blur Detection checkbox to enable blur detection on the camera.
5 Select Apply to save.
- End -
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following
information:
• No. - details the event index.
• Event - this is listed as ‘Motion’.
• Date created - the time and date when the motion detection was triggered.
• Event Stop - indicates the date and time when the event stopped.
• Component - internal software component that raised the fault for a motion detection alert.
This is listed as ANALYTICS.
• Severity - indicates how serious the fault is. Motion detection alerts list as ‘Warning’.
• Detail - extra information that supplements the motion detection alert.
• Delete - remove the motion detection alert notification from the fault table.