Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
7 8200-1929-03 A0
Installation tools
The following tools assist with installation:
• Drill
• Screw Drivers
• Wire cutters
Quick reference
• Default IP: 192.168.1.168 (DHCP enabled)
• Default Username: admin
• Default Password: admin
• Power: 12Vdc / PoE (IEEE 802.3af Class 3)
Checking appearance
When first unboxing, check whether if there is any visible damage to the appearance of the unit and
its accessories. The protective materials used for the packaging should be able to protect the unit
from most types of accidents during transportation. Remove the protective part of the unit when
every item is checked in accordance with the list in Installation tools on page 7.
Procedure 1 Disassembling the camera.
Step Action
1 Use the Torx wrench to loosen the three screws on the camera top cover (1) (Figure 3) and
gently remove the cover (2) (Figure 3).
Figure 3 Removing the camera top cover
- End -