Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
70 8200-1929-03 A0
Procedure 74 Display Event Log
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Logs from the Events and Actions menu. The Event Log tab displays.
Triggered motion detection alerts display.
- End -
Procedure 75 Delete Current Events
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Logs from the Event and Actions menu. The Event Logtab displays.
3 Select the corresponding Delete check box to mark the motion detection alert for deletion.
OR
Clear the corresponding Delete check box to keep the motion detection alert.
Note:You can select the Select All check box to mark all motion detection alerts
displayed in the list for deletion.
4 Select Delete to delete the selected motion detection alerts.
You are prompted to confirm the deletion.
5 Select OK to confirm the deletion.
OR
Select Cancel.
- End -