Installation Guide

Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 72
Enhanced Security
When you first log in to the Web User Interface, an overlay over the Live menu tab appears prompting
you to choose either Standard or Enhanced Security mode. For more information regarding the
requirements for Enhanced Security mode, refer to Summary of Security Modes on page 28.
Admin users can change the Security Mode of the camera from Standard Security to Enhanced
Security.
Procedure 76 Enable Enhanced Security
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Security Status from the Security menu.
3 Select the Security Overview tab.
4 Check the Enable Enhanced Security check box and then the Apply button to enable
enhanced security.
A prompt appears asking you for your current password and the new password for the
Enchanced Security feature. Your password must adhere to the minimum requriments for an
Enhanced Security password as seen below.
OR
Clear the Enable Enhanced Security check box to disable enhanced security.
Enhanced Security is disabled by default.
The Security Warning dialog appears.
5 Enter the current password in the Current Password text box.
6 Enter the New Username in the New Username text box.
7 Enter the new password in the New Password text box.
The password for enhanced security must meet the following requirements:
• Be a minimum of eight characters long
• Have at least one character from each of the following character
groups:
Upper-case letters
Lower-case letters
Numeric characters
Special characters
8 Re-enter the new password in the Confirm Password text box.
9 Click Apply.
- End -