Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
73 8200-1929-03 A0
Procedure 77 Disable Enhanced Security Mode
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Security Status from the Security menu.
3 Select the Security Overview tab.
Note:When in Enhanced Security mode, changing the security mode requires the
admin account password.
4 Click Apply.
- End -
Security Status
This section summarizes the communication protocols that are used and their status. The following
communication protocols can be enabled: HTTP, FTP, Dyn DNS, SMTP, HTTPS, SNMP V1/2,
SNMP V3, uPNP, and SFTP.
Security Overview
Procedure 78 Enable/Disable Communication Protocols
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Security Status from the Security menu.
3 Select the Security Overview tab.
4 Select the Edit button to configure the Protocol.
Note:
When in Enhanced Security, enabling/disabling individual protocols requires the
admin account password.
Users
In this section you are able to add a user, change a user password and a delete user account. There
are three levels of access: admin, operator and user.
Refer to Appendix A: User Account Access on page 100 for details on the features which are
available to each role.
Note:The default Username is admin and the default Password is admin. To maintain security the
password on the admin account is required to be changed on first log in.
View Current User Accounts
View a list of the current user accounts assigned to the camera.