Installation Guide

Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 74
Procedure 79 View User Accounts
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Users from the Security menu.
The current user accounts assigned to the camera display.
- End -
Add User
Add a new user account to allow access to the camera.
Procedure 80 Add a User
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Users from the Security menu.
3 Select the Add User tab.
4 Enter a User Name in the Name text box.
The username must start with a letter and can be followed by any alphanumeric values (a-z,
A-Z, 0-9) and the following special characters, underscore(_), dash(-), or dot(.)
5 Select a Role:
• admin
• operator
• user
Refer to Appendix A: User Account Access for details on the features which are available to
each role.
6 Enter a password in the Password text box.
The password for Standard Security must start with an alphanumeric character and is case
sensitive, it can contain alphanumeric characters with a length of between 5 and 32
characters.
The password for enhanced security must meet the following requirements:
• Be a minimum of eight characters long.
• The password cannot contain the username.
• Have at least one character from each of the following character
groups:
• Upper-case letters - ABCDEFGHIJKLMNOPQRSTUVWXYZ
• Lower-case letters - abcdefghijklmnopqrstuvwxyz
• Numeric characters - 0123456789
• Special characters - @ % + \ / ‘! # $^ ? : , () {} [] ~ - _ `
7 Enter the same password in the Confirm Password text box.
8 Select Apply to save the settings.
The new user account appears in the Users list on the Users tab.