Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 76
required.
Procedure 83 Specify HTTP Method
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select HTTP/HTTPS from the Security menu.
3 Select the HTTP Method using the radio buttons
• HTTP
• HTTPS
• Both
- End -
Procedure 84 Add a HTTPS Certificate
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select HTTP/HTTPS from the Security menu.
3 Click on the Upload button and navigate to the certificate location.
4 Select the file and select Open.
Note:The camera only accepts .pem format certificates. The certificate must have
the server certificate and private key combined and the private key must not be
password protected.
After the certificate has been uploaded the camera must be rebooted to take affect.
- End -
Delete a HTTPS Certificate
If you delete the existing certificate it will be replaced by a temporary substitute. The current browser
session will be lost and you will be required to log back in to the camera Web User Interface.
Procedure 85 Delete a HTTPS Certificate
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select HTTP/HTTPS from the Security menu.
3 Select Delete.
The camera displays a “Restarting HTTPS Service” page with a progress bar showing the
deletion progress.
4 When complete, the camera returns to the log in page.
- End -