Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
77 8200-1929-03 A0
IEEE 802.1x
The IEEE 802.1x security feature provides port based network access control i.e. securing corporate
networks from the attachment of unauthorized devices.
Authentication is carried out through use of the Extensible Authentication Protocol or EAP. Both
PEAP and TLS methods are supported.
Procedure 86 Configure IEEE 802.1x Security
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select IEEE 802.1x from the Security menu.
The EAP Settings tab displays.
3 Select the Enable IEEE802.1x check box to enable IEEE802.1x security .
OR
4 Clear the Enable IEEE802.1x check box to disable IEEE802.1x security.
5 Select the EAPOL Version from the drop-down menu.
6 Select the EAP Method using the radio buttons.
7 Enter the EAP identity name in the EAP Identify textbox.
8 Select Upload to navigate to the CA Certificate location.The Choose file dialog displays.
9 Navigate to the location where the certificate has been saved. Select the file and select
Open.
10 Select Upload. The upload process starts.
11 If PEAP is selected:
a Enter the required PEAP Password.
OR
If TLS is selected -
a Select Upload to navigate to the Client Certificate location.
The Choose file dialog will be displayed.
b Navigate to the location where the certificate has been saved.
c Select the file and select Open.
d Select Upload. The upload process starts.
e Enter the required Private Key Password.
- End -
Firewall
Configure the Basic Filtering and Address Filtering for the firewall.
Basic Filtering
Enable or disable basic filtering for the camera this includes: