Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
Illustra Essentials Gen 4 Series Installation and Configuration Guide
8200-1929-03 A0 8
Internal Interface pictorial index
Figure 4 Internal interface pictorial index
Table 5 Internal interface pictorial index descriptions
Name Description
A
Reboot Button
Press and release the button to reboot the camera.
B
Reset Button Press the button for 1 second to reboot the camera.
C
Micro SD card slot Insert a micro SD card into the slot for video recording and file
storage.
Procedure 2 Mounting the camera
Step Action
1 Place the mounting template on the wall / ceiling and drill three Ø4.5mm holes.
2 Insert the three plastic anchors into the three holes.
3 Determine how the camera pigtail cable should be routed:
• Through the cable entry on top of the camera (Figure 6)
Note:If required then drill a cable hole on the wall as identified on the mounting template.
OR
• Through the cable side entry slot (Figure 7)