Installation Guide
Table Of Contents
- Overview
- Illustra Essentials Gen 4 Dome cameras
- Illustra Essentials Gen 4 Bullet cameras
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- Appendix E: Technical Specifications
- End User License Agreement (EULA)
81 8200-1929-03 A0
The Remote Access tab displays.
3 Select the ONVIF User Authentication check box to enable ONVIF User Authentication.
OR
Deselect ONVIF User Authentication check box to disable ONVIF User Authentication.
The default setting is ‘Enabled’.
- End -
UPnP Discovery
Enable or disable UPnP Discovery on the camera.
Procedure 94 Enable/Disable UPnP Discovery
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Remote Access from the Security menu.
The Remote Access tab displays.
3 Select the UPnP Discovery check box to enable UPnP Discovery.
OR
Deselect UPnP Discoverycheck box to disable UPnP Discovery.
The default setting is ‘Enabled’.
- End -
Session Timeout
Session timeout specifies the number of minutes that a web session can remain idle before it is
automatically terminated.
Procedure 95 Set a Session Timeout time
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Session Timeout from the Security menu. The Session Timeout tab displays.
3 Use the slider bar to select the Session Timeout (mins). The default setting is 15 minutes.
- End -