Installation Guide

86 8200-1929-03 A0
a Enter the username for the SMTP account in the Username text box.
b Enter the password for the SMTP account in the Password text box.
10 Select Apply to save the settings.
- End -
Procedure 102 Test the SMTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the SMTP tab.
4 Select Test.
A sample text file is sent to the specified SMTP destination to confirm that SMTP settings
are correct.
- End -
SNMP
The camera introduces support for the Simple Network Management Protocol making it easier to
manage on an IP network.
The SNMP support includes support for V2 and V3. Using V2 means no authentication is required to
access the data and results are unencrypted. V3 offers enhanced encryption and authentication
security features.
Procedure 103 Configure SNMP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select SNMP from the Network menu.
3 Enter a location reference in the Location text box.
4 Enter an SNMP managing contact reference in the Contact text box.
5 If using V2:
a Select the Enable V2 checkbox.
b Enter the authorized ID for reading SNMP data in the Read Community text box.
c Enter the Trap Community.
d Enter the Trap Address.
e Select Apply.
OR
If using V3:
a Select the Enable V3 checkbox.
b Enter the Read User.
c Select the Security Level from the drop down menu:
- noauth: No authentication / no encryption.